Search:

While overall I am happy with the machine I purchased, there a few things that bother me.

1 - While the dsp system installed on the machine is functional, I prefer the amount of feedback I get...

I recently purchased a 1325 CNC Router from Finecnc.

I had been in discussion with OmniCNC but we couldn't come to an agreement on both specs and price.

So I decided to try and go with an...

Beer is very high in vitamin P!!:cheers:

How are people attaching the spoilboards to their pro kits?

I might be wrong, but the wires labelled X+, Y+ and Z+ might be the limit switches. By the looks of the picture, they are all piggy backed onto pin14.

As the title asks.

Has anyone dealt with Finecnc (Qingdao Jingmei Machinery Co., Ltd. )

As stated in the post subject I am looking to import a 1325 from China. I was wondering if anyone from the USA has done this recently, and can help me with some much needed info on the costs and...

That seems to have fixed both the problems :)

I am using ShuttleRU_STM32.v.6.6 that I downloaded from your site. The one written by AiR_GuNNeR. I will install the one you sent me

I received my Pendant today and it is AWESOME!!!

SO far I have only 2 small problems with it and I think that it is really something wrong with the plug in

When I go to set up the first button...

in the system hotkeys:
z is 90
x is 88

Right now I am using Mach 3 with my cnc machine. I am using the "Mach Blue Probing by Big-Tex screenset". It has to built in zero routines, that I can start by pushing buttons on my keyboard.

It...

I have purchased a shuttleru, and while I wait for it to arrive I am doing a bit of research on setting it up. I use the big tex screenset, and I am wondering how to get it so I can push a button on...

I have purchased a shuttleru, and while I wait for it to arrive I am doing a bit of research on setting it up. I use the big tex screenset, and I am wondering how to get it so I can push a button on...

Just ordered my ShuttleRU_STM32, can't wait for it to arrive. A question for those that have ordered one in the United States. How long did it take for delivery?

Well i finally got fed up with my chinese VFD and bought a Hitachi x200. Has anybody else hooked up one of these to ther cheap spindle. I am having problems getting it running correctly. I...

I dont know, i count 4 good reasons >.>

But seriously, this is really cool

I am interested, but I really would like to see a sample of a digitized file from the machine first. I am not too good with the 3d programs yet, so if there is a lot of cleanup to do, it might take...

Looks good, might want to try a ball and bit for the carving, with a low step over (10% of the bit diameter) you wouldn.t get the stairstepping. If you dont mind me asking, where did you get the...

Quick question, I have converted my mini mill to belt drive. I am planning on replacing the bearings, as it seems that i have a good a amount of runout. Do I Have to reinstall the gears if I do...

Oh no, dont tell me I bought your dvd a week to early!!!

thanks I will try these suggestions out and see if one of them works!

the dro showed the correct depth for the cut

cut 1: .0625
cut 2: .125
cut 3: .1875
cut 4: .250
cut 5: .3125
cut 6: .375
cut 7: .4375
cut 8: .5

In sheetcam I set up a file to cut .5 inch with a .0625 increment ( no ramping). When I run the program and the cuts are as follows.:

Cutter starts at X:0 Y:0 Z:0 Raises 1 inch than moves the...

Joe,
I am using sheetcam and mach3

I Have the machine assembled and cutting, but I am having a wierd problem. I zero the z axis at the top of the material and then run the program. The first cut is always deeper then it is supposed...

Joe,
Where did you install the home and limit switches? Do you have pictures by chance. All I have left on my machine is to install these switches then I should br ready to cut.

John

Does anybody know of a site that has a circuit for a mach 3 compatible chrge pump?

Thanks for the quick reply

I must be dumb, but I can't find the instructions for making the bearing slides.