I would agree at this point, I don't think anyone offers them for the ST10. The split bushing looks to be the best available option, ordered one this morning so I will soon know...
My being new...
Type: Posts; User: Ahamay17
I would agree at this point, I don't think anyone offers them for the ST10. The split bushing looks to be the best available option, ordered one this morning so I will soon know...
My being new...
Haas ST10 BOT tool hoder with split style clamping
Like the title says, looking for someone who offers them, I am needing it to hold a 1" fully round anti-vibration boring bar, if anyone can share...
I haven't seen this posted here in the Novakon forum so I thought I would share as most OEM Novakon machines are running Mach 3 ...
...
In trying to do some tapping with Fusion 360 on some fixtures, and ran into this issue…
On the code below, when Mach3 implements line 18, the spindle which is already running at 1206 rpm bumps up...
FWIW........ We did our install on the gigabyte GA-H81M-S2PV mobo that came with our Torus Pro, we had to change the bios settings to allow hot swapping of sata drives, and the boot order to read the...
Now that there is a file set specific to the Torus Pro, I decided to give this a shot, so I ordered the PathPilot DVD by calling Tormach (not sure why so many try so hard to circumvent the phone...
Thanks for sharing, and thanks to everyone who has contributed to this point! And so long mach3
Ray
Hey Scott, any chance you have your files ready to post? It would be awesome if you could share them and save me (and others) the time you spent!
Ray
Novakon website has the VFD listed for $281, the resistor for $89 add in shipping and round up....yes I have the Sunfar C300A, and the C300 is the one that works with the resistor..
6061-T6, not...
Before I spend the $400 required to upgrade to my spindle motor driver and add a braking resistor, I am curious....is anyone using it to stop/reverse/dwell/stop/forward the spindle to remove stringy...
I have ZERO interest in your personal opinion, so show me the clear cut documentation published openly by Newfangled Solutions that supports this claim, as I am calling total BS...because what you...
phhhfffttt...
So admittedly, I don't have the knowledge to swap hardware, reconfigure the software involved in switching my machine over to pathpilot....how does this disqualify me from having a...
It seems to me PathPilot is currently the best option, and probably will continue to be....However, tinkering with the machine itself and it's components is just not something I take any interest in,...
Mike, why specifically are you leaning in this direction? Have you researched what all will be required to make this move on your Torus Pro? Have any costs?
We would love to get rid of Mach3 on...
Torus Pro, mine has leaked as you described since about the second week of it being filled up...
Supply is the first direction we checked on ours, before finding the VFD settings to be the issue. We have a 14 gauge supply cord to ours, now that the VFD settings are correct it spins up like the...
When you get a moment, could you verify for certain that you have the C300A as opposed to the C300, and if so, could you share your decel setting (F0.11) ??
Tia!
Ray
I looked through my emails and John told me my C300A will not support the braking resistor, only their newest model, the GS2 will...
Are C300A and the 300A different animals?
I don't think the braking resistor can be used with the C300, at least that's what I remember John saying....
As for the settings, I would look at them again and make sure they were saved when you...
An update.... I have been running for several weeks now the accel 1 (F0.10) value at 0.3, and the decel 1 F(0.11) at 1.5 without any issues...I have ran the decel value lower but nothing was gained,...
My deccel is set at 2.0 and has been set there since last July without any issues...I raised it to 4 then 3 as John suggested and quickly found I don't have the patience to wait that long for every...
The link took me to an Instagram login page...I don't have Instagram so that is as far as I got...lol
Got it, and thanks John!
Ray
Thanks for taking the time! I went through my settings and the only ones that were different were also ones you noted Acc time 1 - 0.10, mine was set to 2.0 and Decel time 1 - 0.11 mine also set to...
By all means feel free to share any and all settings that would cause a low power output, as it is right now I am at a stand still waiting to here back from Novakon... My VFD is Sunfar C300A
Ray
I am currently running our production out of 1/2" 6061-T6 flat bar, cutting with a HTC solid carbide 3 flute 38* helix 1/4" dia with .750" loc and .950" stick out...I have the RPM set to 6000, feed...
What kind of MRR can be expected in aluminum 6061-T6? And what are you guys getting? Mine seems very low, no matter what combination I use the spindle begins to bog down drastically at anything...
All I cut is aluminum and as I mentioned the issue has shown with the machine near spotless...I have modified the coolant spray and toolpaths to keep the chips washed off of the machine, almost all...
Having a couple of issues and some questions which I have searched this forum for without any luck...
Anyone else have either of these and better yet, solutions?
1) I can't leave the...
1) Not a big fan of this option, obviously...
2) I guess I need to find out Mach4's shortcomings and if they will be relavant to my needs...??
3) Not a fan of this option either, I have enough...