PROBLEM SOLVED Per Huanyang instructions I did a factory reset and entered only the following values.
P0.00 = 0
P0.03 = 400
P0.04 = 400
P0.06 = 400
P2.02 = 400
Motor spun up like it...
Type: Posts; User: wmcrinc
PROBLEM SOLVED Per Huanyang instructions I did a factory reset and entered only the following values.
P0.00 = 0
P0.03 = 400
P0.04 = 400
P0.06 = 400
P2.02 = 400
Motor spun up like it...
Sorry, I tried to upload a GIF but it gets converted to a JPEG... not helpful. Basically, VFD in idle state shows "400.00". When I hit run the display shows 0000 for a few seconds and then some...
Here is a little more info. Attached is a GIF showing the VFD display. The numbers fluctuate after I hit run. Same effect when I have the spindle attached HOWEVER, I noticed that the spindle tries...
Yes, those are the numbers that I was using. I have double checked the spindle cable for continuity as well as my power connections. Can I measure VFD output voltage with a standard DMM or isn't...
HY GT series, 220v 2.2kw VFD
Spindle: 220v 8A 400Hz max speed 24000
Thank you for your help. I did immediately shut down thinking of possible damage.
Initial setup on my CNC router build. I have a Huanyang GT series VFD powering my 2.2kw 220V spindle. The spindle "sputters" a half revolution on start up and that's it. It will not spin. I've...