I bought a LINTCNC 1212 2 or 3 years ago and it has been a pig. Terrible company to work with. The insides of this machine were covered in metal shavings. All over the linear bearings and on the lead...
Type: Posts; User: Rfergman
I bought a LINTCNC 1212 2 or 3 years ago and it has been a pig. Terrible company to work with. The insides of this machine were covered in metal shavings. All over the linear bearings and on the lead...
Just to update and close this thread........seems the issue is solved!!!
I ended up enclosing all electronics in metal enclosures. All cables (including the power cable) are now shielded and...
I think my issue is more EMI related. The lost step issue is completely random. I can run the same part multiple times and it will lose steps in different places. All axis are clean of debris and...
Apparently, I jumped the gun in thinking my problem was resolved. I haven't run the machine much the past few weeks but fired it up to build my electronics enclosure. The problem is not isolated to...
ger21.....I think your on to something with your overheating suggestion. I ran the part again with a fan blowing across my Gecko. The part completed perfectly.
In just some simple testing, I ran...
I do not have any type of cooling on the G540 at this time. I plan on building an enclosure for the electronics and already have the fan and heat sink, but have not gotten to it yet. I suppose it...
Need suggestions on troubleshooting My Z-Axis randomly losing its height. I have cut this file 3 times and it has changed depth all 3 times, but in different places and to different depths. Since it...