Did you get help with the drive? If not, call Mitsubishi and get a simple procedure to check droop and gain.
Type: Posts; User: itmancnc
Did you get help with the drive? If not, call Mitsubishi and get a simple procedure to check droop and gain.
The best source for information on your machine is the machine manufacturer, in this case Feeler or the local distributor. Mitsubishi keeps records of the parameters but it would take time for them...
I agree with the previous statements, it wouldn't hurt to get a new software package from Mitsubishi. I would strongly recommend the replacement of the floppy disk drive prior to installation of new...
Don't know were you are with respect to the problem, but I don't think it is a parameter issue, seems to be a PLG (feedback, Pulse Logic Generator) adjustment. Typically when a PLG is missadjusted...
You may want to try adjusting your field currents. The motor tag should provide your max. and min. currents.
If you have a parameter manual, you can change several servo parameters that affect the servo responses. High gains can cause this type of problem, the problem may not be in the spindle. If the...
If you have not been able to communicate to control give me a ring. [email protected] or 678-3614785, I have some literature that might help you.
By the machine model I believe the control must be an M0.
Most Mitsubishi controls are very picky about parameter settings, another important item is the cable configuration. I worked for Mits. for quite sometime, if you want email me your cable...