Search:

Some new guys here have a lot of good to say about this software and its price. I think they had a promotion on recently as one fella here bought a copy of CAD for his hobby business.

VISI | CAD...

So far so good. I have spent a small amount of time with the new version and feel that it finally added the missing requirements to do some serious usable automation. Yes, it has some functions...

update...we gave up using the mitsu supplied non acidic cleaner as it was not working for sh$@@ and after checking the forums to find the same problem, we used diluted (10-1) CLR and luckily did not...

Hello, we just had to replace the lower ceramic bit on our machine and now can't seem to line up our y-axis with the alignment tool.

It seem to flash the lower and upper guide lights but never...

FYI, in-case anyone is around....

We have made a few jumps up to the new version.

Pro's or new things that we like so far
A. Spiral is nice sometimes to have when using Z-Level...

In is a fanuc servo board...over 25 years old. Is that enough info?

thanks

Can someone send me a sample of 3+2 code for a spinner machine with a
Siemens control.

I am wondering if it is possible to make a utility to translate our existing Heidenhain code to it.
...

Does anyone have the latest major point release yet?

Q361=+3 ;NUMBER OF MEASURINGS ~
Q362=+0.01 ;DISPERSION TOLERANCE ~
Q359=+0 ;ADD. LENGTH CORRECT.

Hello, I am finding that our laser is not picking up our small .5mmb cutter quick enough...

Hello,

I get an edit rejected error when I try to punch out my parameters.

Does anyone have an experience with this error. I looked through my manual but did not see anything on it.

I...

thanks for the help J. I did not know anything about keep relay data. I found 6 entries of info that make my hydraulics turn on. I also see a lot of timer info in some notes that I may need to...

Well, I thought that I was making progress but can't get rid of an 'emg' error from my control. Nor can I start the hydraulics using the start button on the control.

I am wondering if the button...

The iges works fine. I can change it to suit whatever the gods of mini-choppers want to do with it.

cheers

Yes, I am sifting through the manual now. I suspect to have them all done in 5 minutes....ok, maybe 5 months.

thanks
Sean

Hello,

I am wondering is someone could point me to a reference set of parameters for my machine. I have two paper copies of parameters for my machine but they are different and leave me in a bit...

Correction, it was not hung up, it was waiting for a Y and I was hitting O for ok. oops.

I did get the controller up but it still seems to be missing it's parameters. I have some things to...

I tried 99 and it tried doing something but got hung up.

..
SYSTEM GENERATE
CHECK SYSTEM LABER ; ERROR
INITIALIZE SYSTEM LABEL OK?
..

I could not do anything at this point.

I am guessing that the size of this required would be about 2" high (50mm) and roughly 4 or 5 inches across. It will be going on the front of the bike on the fork tri-support.

thanks

https://www.mooneyesusa.com/Store/imagemagic.php?img=images/Igbb03.jpg&w=300&h=300&page=prod_info

http://www.vondutch.com/store/productimages/regular/9031.jpg

This is what the young-fellers are...

yes, it is an 11m. I have not tried initializing anything until I change the batteries. But, I was assuming that I have lost the parameters.

I checked around our Millrights vacant area but found...

Correction machine is FV65 Toyoda.

Also, under the first set of information, the machine has the following flashing error.

CHECK SYSTEM LABEL : ERROR

Correction machine is FV65 Toyoda.

Also, under the first set of information, the machine has the following flashing error.

CHECK SYSTEM LABEL : ERROR

Hello, I have an old V65 Toyoda with a system 2 Fanuc controller that does not boot up. The only explanation that I have is that it has been powered down for some time and lost it's memory.

If...

I think that you do not edit the BLUM_000.tab file. You must run the calibration program and change the length of the known tool and re-run if required to tweak the length.

Had anyone ran the...

Hello Moderator, thanks for having such a good site.

I was wondering if you could make a directory for Tebis software so all three of us in canada can talk ...(haha).

thanks
Sean

Hello,

A kid in my shop want me to machine something called a flying eyeball for a mini-chopper that he is building.

Does anyone know of a free or share program that will help me draw this...