I've solved the problems!
I didn't know that the breakoutboard it should be connected also to USB computer in order to get +5V :))
Thanks guys
Type: Posts; User: view2
I've solved the problems!
I didn't know that the breakoutboard it should be connected also to USB computer in order to get +5V :))
Thanks guys
Thanks guys.
1.In the John's "BOB to driver connections.jpg" above, CP+, CW+ go to + 5V but in the "automationtehnologies" pdf wiring, CP+ and CW+ go to GND.
Wich one to consider ok?
2. I still...
After wiring like this, all is ok and not.
Some times motors run some times not, when push Jog +/-.
Or run X + and Z + or Z- not..etc
I have to play many times with all X+-/Y+-/Z+- Joging to get...
Thank you "mactec54".
I've checked the voltage on BoB.
0-10v is 10.46v
0-5v is 4.67v
First I've wired like this:
P1-PWM to VI in VFD
GND to ACM in VFD
Relay2 On/Mid to FWD and DCM to VCD
...
Hei Guys,
Can anyone help me to wire VFD to BoB?
Thank you.
Many thanks John!
Hi,
I am new here.
Can anyone help me to connect CW8060 driver to the breakout board?
CP+
CP-
CW+
CW-
EN+
EN-
?