Search:

trying to change parameter #24 (stop bits) control wont let me
I can change #25 (baud rate) but not #24
anyone know why

cant change parameter #24 (stop bits) have installed a BTR and it is 1 stop bit (cant change it) and machine is in 2
anyone have any reason why I cant change the machine parameter I can change #25...

help need to find a parameter that will make my turret only index one way
i have a hwaceon lathe with fanuc 18-T large setup that i dont want to move the tools around on my maintenance guy says to...

I believe the m codes are m10 and m11

i need my tail stock to move in program with the chuck unclamp i want to move it forward advance the quill to center and hold a part while my operator puts shims in the jaws then clamps the part hits...

i have a mori seiki sl-6b lathe that i want to hit my start button have the tail stock move in to position,hit the start button have the quill advance,clamp on my part,hit the start button have the...

thanks for the info. only need a 5.0" thru hole for my parts so the 6.3" will do fine. i support the end of the pipe with a bull nose live center thats in a fixture bolted to a mill table so i can...

sorry about cap"s program all dat so that's all i see. okay seem's to me that this is done to engine lathes but iam being asked to but this on a cnc lathe with a exsiting hydrulic chuck there are no...

THATS WHAT THEY WANT THANKS FOR THE PIC . I AM IN ILLINOIS NOT A LOT OF OIL FIELDS AROUND HERE HAD HEARD OF THIS BUT NEVER SEEN .
STILL NOT SURE HOW TO ATTACH TO THE MORI BUT NOW I KNOW IT CAN BE...

ARE YOU CHAINING YOUR STOCK IN?

I GOT A HWACHEON 12" CHUCK MANUAL LATHE THAT WE HAVE PULLED AND REPLACED THE GAP BED ON MANY TIMES WITH KNOW PROBLEMS AT ALL.

I RUN A 13 FOOT DRILL PIPE IN A SLANT BED LATHE TAKES 2 GUYS TO RUN THIS JOB. MY COMPANY IS PURCHASING A MORI SEIKI SL-6B LATHE TO RUN THESE ON. I HAVE ISSUES WITH THE MACHINE THEY ARE ON NOW AS JAW...

looking for a parameter list for a MF-M5 fanuc controller on a Mori-sekie mh50 horizontal mill

my high tech 700 hwcheon got crashed by tool haging out to far in back
manual has a procedure to realign but it calls for group 1/b screen in the pmm
comes up in group 2/b and i cant get it to the...

Use Cutting From Chuck To End Of Part With My Finish Pass On All Long Over Hangs, Most Of The Time With A Vnmg Or Dnmg Type Insert.got This Trick From A Old Programmer For Catterpillar.i Do This Even...

My Shop Gave Up On Emuge Now Use Osg Taps. We Tap Everything(a2,d2 4140 Per Hard,1018 And Cast Iron) With Them(ridgid And Floating Head),and They Are Cheaper Than The Emuge's,use To Do The Same Thing...

Draw Stock In And Chain As Stock In Job Set Up Under Boundaries
If Stock Size Changes You Will Have To Redraw It And Rechain
Its A Good Idea To Do Your 1st And 2nd Op's As 2 Files As You
Can't...

i need to demag some large gear blanks ,these are costly machines.
has anyone ever built one of these .i would like to try without frying myself
in the process

thanks will try different forum the parts are large gear blanks
400.mm dia. x 350.mm long this is the largest part i would need to demag

new here sorry if wrong froum trying to found out about demagnitzers
would like to build one for large parts

anyone know parameter for offsets my ware is set for .1 mm moves and i would like to up this to .5mm never used a fanuc this old and i dont have any manuals

thanks for the help worked great

thanks never used a controller this old and my company has no manuals for it

how can i download more than one program at a time

how do i get more than one program out at a time i upload weekly and this
is very time consuming

try m6 for advance and m7 for retract this is how my hwacheon works