Search:

i can confirm that artcode 8877 means mach3 hid driver clash error,if you want to sovle this problem,please copy mach3mill.xml in the XHC-MK4 dirver disc .or close mach3 after you select new...

i advice you try xhc mk3/mk4 usb motion card.

THE New XHC MACH3 USB CARD support thc auto control,but the old generation card maybe don't support this function.

to open the macro file m881 to 884 etc. in the directory c:mach3\macro\2010\, and replace getvar(2002) with GetOEMDRO(802).then eveything will be ok!because of the parameter is not operated by many...

to open the macro file m881 to 884 etc. in the directory c:mach3\macro\2010\, and replace getvar(2002) with GetOEMDRO(802).then eveything will be ok!

http://www.cdxhctech.com/html/edownloads/view_201.html,this is english download page

please visit our web:http://www.cdxhctech.com/html/edownloads/view_201.html
you will find the whb04 new driver.
if you have any problem you could add the fae skype number:chao152

thank you for your advice,we will build the third encoder mode in the mpg mode!

yes,for safety we don't do that like you want

When user switch to xhc shuttle MPG mode. You have two modes to choose.


First Please into “config plugins” and choose our plugin “shuttlepro …”,in the mcro-1 combox,please choose “MPG Increase...

you could download the xhc shutttlepro new driver :v3.5.9 at http://www.cdxhctech.com/html/downloads/view_119.html

to download the xhc shuttlepro-whb04 driver,please visit our web:http://www.cdxhctech.com/html/downloads/view_119.html

to download the new driver ,please visit the xhc web:http://www.cdxhctech.com/,

i am here