502,157 active members
5,846 visitors online
Register for free
Login

Search:

Type: Posts; User: Jorg_Aussie

Search: Search took 0.00 seconds.

  1. Replies
    8
    Views
    157

    Re: lynx 200 Question

    Weird I can't see the attached file from any other pc, nor can I edit the post above...
  2. Replies
    8
    Views
    157

    "G97S250 M29 P11 G99G84Z-0.625 F0.0625" I used...

    "G97S250 M29 P11
    G99G84Z-0.625 F0.0625"
    I used this format but in metric
    again the machine gets to the position and sits

    attached is current parameters if anyone could shed some light ?...
  3. Replies
    8
    Views
    157

    tried this and no alarm I see hope....

    tried this and no alarm
    I see hope....
  4. Re: loading tools using their pocket number in G Code on Haas CNC mill

    versatility kills production time.
    set more parts per cycle is the best solution.
    also tool change to the first tool at the end of the program with next tool pre-stage to save time.If you are like...
  5. Replies
    7
    Views
    79

    Re: HAAS P-Cool

    hi , by p-cool I assume it's the programmable coolant nozzle?
    I know air flows through the spindle bearings for a long time to oil the bearings and prevent coolant ingress into the bearings
    are...
  6. Re: VF3 With Intermitting Tool Unclamp Alarm.

    Had this also with insufficient air pressure even if it didn't throw the low air alarm, tool changer arm would stall during tool change.
  7. Replies
    8
    Views
    157

    Re: lynx 200 Question

    Hi Thanks for the reply.
    I'll give it a go with the mdi option.
    from memory when m29s200 was programmed it just sat there with no alarm.

    I have also found a trouble shooting guide with...
  8. Replies
    8
    Views
    157

    lynx 200 Question

    Hi all
    brief intro
    Live in Australia, Queensland, Goldcoast.
    I'm a qualified fitter turner with cnc experience since 1988
    Machine controllers used; Haas and Fanuc.
    Machine types
    Lathes Mill...
  9. Replies
    1
    Views
    16

    Re: Coolant / Cutting Fluid

    try iscar
Results 1 to 9 of 9