502,157 active members
5,897 visitors online
Register for free
Login

Search:

Type: Posts; User: metalcutting

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    15
    Views
    141

    Re: OKUMA LATHE LB-3000 SPINDLE REPAIR

    Please contact on prabhatmishra74@hotmail.com
  2. Replies
    2
    Views
    56

    Re: Maho 1000 c

    communicate me on prabhatmishra74@hotmail.com
  3. Replies
    2
    Views
    4

    Re: Fanuc A14B-0067-B001 power supply

    Its very easy to repair , It has fuses , relay , a power contactor and PCB Fuse , If any help required let me know
  4. Replies
    1
    Views
    4

    Re: Floppy to USB drive emulator

    you want FLOPPY DRIVE EMULATOR make Haas or any compatible is ok to you
  5. Re: I need help to revive a 810 T GA2 control

    is it CRT or TFT ?
  6. Re: help with spindle motor winding resistance 10hp

    Make motor off line and put +05 -05 v in phase to phase and see the voltage dropping phase to phase and compare to earth
  7. Re: Fanuc 0iMC -9031 Motor lock or V Sig Loss

    TRY M 40
    M 41
    or check the motor
  8. Re: Takisawa lathe with fuji spindle drive issue

    Please check the input fuse of drive , than breaking resistor , and control voltage if all are ok , than check the scr module , alarm is of spindle or E stop ?
  9. Replies
    2
    Views
    142

    Re: Fanuc Test Stand

    Check the Motor cable and axis load , Jog in Low rpm and check the load
  10. Replies
    75
    Views
    6,462

    Re: What will happen if we give 60HZ supply to a 50HZ CNC Machine?

    you can use 60 Hz even it wont will effect the components , but 50 Hz is better while using in PWM and Phase shift circuits
  11. Replies
    1
    Views
    121

    Re: PULSECODER

    Both are alpha series pulse coder you can use
  12. Re: 250 milliamp fuse blows when VF2 is off

    check the control circuit and wiring , also check the control voltage
  13. Re: Help needed Spindle drive connection on fanuc 6T- B model

    ENB 1 AND 2 ARE ENABLE SIGNAL WIRE VCMS FOR VELOCITY MASTER SPEED, NEED THE DRIVE PICTURE FOR CONFIRMATION , WHAT 'S APP - +91-9384248184
  14. Replies
    6
    Views
    244

    Re: Fanuc error 998 ROM Parity Error

    what is the ROM version
  15. Re: Hartford VMC 850 / meldasmagic64 / G03 causing locking up

    check the option param
  16. Re: Backup Parameters for cnc acramatic 2100?

    Look at :
    http://www.cnc.info.pl/files/a2100_operating_manual_166.pdf

    http://ftp.ruigongye.com/200807/91204426a001.pdf

    - - - Updated - - -

    Look at :...
  17. Re: spindle & VFD advice - can anyone point out what to look for?

    Take mitsubishi vfd . Its easy for hobbyist
  18. Replies
    42
    Views
    8,310

    Re: Amada pega fanuc 04pc system error

    Is it turret punch ? or
  19. Replies
    2
    Views
    3

    Re: Fanuc 3T operator manual

    here you can get the Parameter and maintenance manual
    Fanuc 3t Manuals User Guides - CNC Manual
    For Operator manual Give me some time I will scan and upload
  20. Replies
    2
    Views
    435

    Re: Need 1984+ Leadwell Mill Manual

    Is your machine with Fanuc 10 MA ? or else ?
  21. Replies
    9
    Views
    4

    Re: Fanuc Series 15-T manual

    Useful link :
    https://quantumautomation.wordpress.com/
  22. Replies
    9
    Views
    4

    Re: Fanuc Series 15-T manual

    One For Programming
    and Another is for operation , For TB Series 62554e is the correct manual
  23. Replies
    5
    Views
    1,311

    Re: PLEASE HELP KIT MC1 OM B

    After power up you use Handle / MPG towards negative direction to axis movement First
    Or do Grid Shift arrangement as :
    https://quantumautomation.wordpress.com/2016/06/07/grid-shift-adjustment/
  24. Re: Need Help about correcting working menu of machine tool

    The FANUC PICTURE is a software you have to get frm fanuc
    the tutoria link i a pasting for you
    http://ftp.ruigongye.com/200807/fanuccncfaptpicture02.pdf
  25. Replies
    42
    Views
    8,310

    Re: Amada pega fanuc 04pc system error

    Dear Jai
    Download it from here
    CNC Manuals: Fanuc Manuals Part2 - CNC Manual
Results 1 to 25 of 32
Page 1 of 2 1 2