Search:

http://www.cncmasters.com/
This might help you if they are one in the same,

I would definitely buy one with pneumatic tires only. The solid tires suck and bounce all over the place unless you are on an ultra smooth surface. bouncing mean what ever is on the forks wont be...

Not sure, but I think it is an "ENCO Model #105-1133". I have a RF31 and it is different... If it is in fact a RF31 I have the manual for it if you need a copy.

Boosted,
Congrats!!! on your mill, I'm sure you have read this before on here but, Be sure that it works then take it apart and clean clean clean. Then re-grease and oil it back up and make your...

Not real sure but I think the you have a 10 micro step drive that was not taken into the formula.

Boosted,
From what I have read is that the coolant has two jobs, one being to keep the work piece and tooling cool and the other being to remove chips so that they don’t get re-cut. My mill is...

Boosted,
I have a RF31 that I'm in the middle of re-doing the controls and mechanicals on. I have had this machine for over 2yrs and the "round column" is only a problem if you do not think ahead...

Isn’t there 2 “r’s” in embarrassed?

What voltage are your running to the steppers, they are rated at 6.3v, but what I have read you can run them at 20~25 times that.

yes there will be actually 8 total, 4 per symbol on the drawing. I havent wired anything yet, I will do it in the morning, was wanting some imput before I spent time on something that wouldnt work

viper,
switch would be the easiest, just not much room to hide things any more, 2 monitors in the mirrors, cam in the tail section, dvd player, NOS, neon lighting led strobe, XM radio, remote...

Al
the new ignitions can, both the cdi and tci ignitions have timers to kill the power if the are not doing anything. I have seen 2 tci ignitions fail because the key was left on..just not taking...

This might make things a little clearer, not sure if I use the correct terms or not

http://www.cnczone.com/gallery/data/500/medium/gsxr1000.JPG

Al,
The ps is actually just another 12v battery that can be easily unplugged at night. Most all of the custom shows require that the battery be disconnected and the fuel drained. A lot of show...

Al,
thanks for the reply,the current draw is 1.5 amps. What I am doing is this, its a custom bike with 3" monitors mounted behind mirror tint glass(they look like the mirrors for the bike), their is...

I’m doing a circuit on a motorcycle where I need a diode to block the 12vdc from bleeding back and powering up other components. My question is if I twist the cathode leads together then the anode...

46, What I use to could do all day, now takes me all day to do!!!

31 yrs in the motorcycle industry, opened a parts, accessory and service shop 6 yrs ago. I'll offer the same, if you need to know something about your Honda, Yamaha, Kawasaki, Suzuki or Harley ask...

I first drew two circles with X"0" Y"0", one was smaller than the other (1/4” or so), then I divided both circles into 360 parts (change > break > divide). I then changed colors and drew 5 join lines...

This is a 4", will this work for you?

I have a RF31 mill and it my understanding that they are made in Taiwan and not main land China. It is also my understanding that the Taiwanese take a little more pride in their work. I also have a...

I haven’t had much time to keep up with the “Zone”, but I did want to say that while I was changing over to the new stand I decided to do some tests as far as finish quality. All tests were a 3/8 EM...

I have been work on a couple of issues the software has (1) rounding on the "decimal to fraction" (2) storing the data for recommended speeds. I currently have the decimal to fraction set to calc....

When you open the file in Bobcad does it look correct? if so when you save it "save as" ????(file name) .cad, then anytime you click on the file it will start bobcad and then open the file...hope...

not sure really, I think it just one of those programming issues. I have always had to do it that way (save it 1st, then open with BCC).

save the file to your computer somewhere, then open bob/cad go the menu on the top "file" then "open" and find the file you just saved...

kochevnik says "One thing I notice, no matter how fast your mill is, you always want something faster" got me thinking about trying to get more rpm out of my mill. Currently the fastest is 3000rpm....

Tried to send a "PM" said your message box was full
3.00" is the smallest I can get in a 16" wheel. I can contact a friend of mine in Houston and see if he can cut (2) 3.5" waffers for you, you...

Take a look here....there is video on what you are looking for, you have to register (its free) to download them. Training videos

Getting the mill mounted in the stand/tank and plumbed for coolant, was wondering what coolants work best, I mainly do Aluminum, but also do mild steel and stainless every once in a while. Hers is...