I put a switch between 12 and 5v like you suggested and still nothing. I am getting a solid 5v supply from my 5v but it's not showing on the diagnostics page. I then downloaded a parallel port...
Type: Posts; User: esscott24
I put a switch between 12 and 5v like you suggested and still nothing. I am getting a solid 5v supply from my 5v but it's not showing on the diagnostics page. I then downloaded a parallel port...
Yeah I did try driver test and my system was pulsing fine all the way up to 100khz. My input voltages are .40 in high and 0 in low state and i'm running Mach on a pc.
I was having this problem on...
I tried what you suggested and still nothing. Although, I couldn't find the pullup resistor switch. I attached pictures showing what I mean about the switches in mach3 changing when I connect the...
I can't seem to get my Homing/Limits to work. I have tried almost everything.
The only way I can get them to work is if I disconnect my Breakout Board, but once I connect my breakout board the...
For now I'm using a 37v 350w power supply controlled with a PWM converter connected to a pontentiometer. My goal is to eventually control my spindle using mach3 with PWM, but for now the...
Thanks!! The spindle is a 300W brushed spindle from zentoolworks. It is originally designed for their desktop CNC machine kit.
Hi, let me start by introducing myself as this is my first post on this forum....I am a sophomore in high school and this summer I built a cnc machine using 8020 aluminum. I started my design based...