Hello
I have this problem after I generate g-code on NX CAM . How to solve this problem ? Pls advise me
Type: Posts; User: Mongkol
Hello
I have this problem after I generate g-code on NX CAM . How to solve this problem ? Pls advise me
Hello ,
I am finding the post processor of 5 axis for NX CAM same as this video.----> https://www.youtube.com/watch?v=_afKa-6iFmc
Who can help ?
Regards,
Mong
Hello Friend,
The good THC and quick response. It is produced from thailand manufacturer. It can link with mach3 software with good action. The prices is not expensive.
If anyone interested in the...
Dustin,
1) Switch to MDI page on mach3 screen...Try typing G28.1 Z3.00 F1500 on MDI ( For me ,I use metric unit ). ---> Enter
The torch tip should move down to hit the material and then the...
Hi Experters,
I need the help. I have spindle motor with vary 0- 12000 RPM and 750Watts.
I am not sure this range of RPM is enough to engrave the wood or acrylics or not. I see some popular spindle...
Hello Friend,
I try to find the supplier can sell the 1650 hypertherm plasma cutter to ship to international customer. Who know this detail ? Pls advise me
Mongkol
Winegar,
Do you have THC with your machine ?
Mongkol
Carl,
Look well for the floating head. I guess you are using the thermal dynamic plasma cutter. Do you use THC for your machine ?
Mongkol
Sorry, The number is wrong. again.
I see the two blue-wires going to CN7 on the driver.Where are they come from ?
I guess they come from C11G BOB but I don't know how to connect. Pls advise
...
Chris,
I see the two blue-wires going to CN5 on the driver.Where are they come from ?
I guess they come from C11G BOB but I don't know how to connect. Pls advise
Mongkol
Chris,
I have 2200 W,6000 RPM BLDC motor and the driver from Sangmutan.
I have C11g BOB also.
I try to connect the BLDC driver of Sangmutan to C11G BOB but it's not successful. Do you have...
Winegar,
I have one idea.
Try cutting the simple of rectangular.
Have a look at the edge of cutting.
The edge after cutting should be smooth. not have wobble.
If you still see the...
I can not see. Pls advise
Dear Sir,
I need the help. In the present, I can see DRO's of X,Y and Z on mach screen. I want to use A-axis as well. I want to see DRO's of A-axis on mach screen. How to set up ? Pls advise .
...
Dear All,
I have the powermax 1000 with machine torch. I am little puzzled.
If I choose single phase on power supply or If I choose three phase on power supply,how to differ ? Quality of...
TinMan,
Right now, I am using cutmaster A-120 with the machine torch same as you.
The edge cutting is very beautiful if I cut the thin material.
I found some problem if I cut the annular of...
Jim,
Thanks so much for the good idea.I am little puzzled with spray as red statement. I can not imagine how is the appearance of spray. Do you have the sample picture of this one?
Mongkol
Chris,
Thank you very much for the post. I am interested in your method. I think I will retrofit the old milling machine to be CNC. I don't know how to control the spindle motor. I read your post. I...
mcphill,
I know solidstate relay, It may be another choice.
Could you pls advise me for the simple circuit ? or what website sell the PCB of this case and connect to the breakout board as well...
Hello Experters,
I try to control the water coolant by mach3. I buy the water pump (0.5 hp) at 220 volts. If I plug 220 volts,the water pump will run immediately.
I know M-code,M07 is turn on...
If I want the lasercut software with the latest version, where can I buy from ?
Mongkol
Iron-man,
I am little puzzled.
Does it have charge pump system on this schematic or not?
Mongkol
Thanks Jim,
The information is very useful.
MomentZ,
This project is interesting. Here's the information. It may help you.
http://www.cnczone.com/forums/showthread.php?t=26128
http://www.comagrav.com/oscillating_tangential_knife.html
...
Nick,
I had ever found this problem. I used rack and pinion for moving and I used the springload also. I found this problem on X-axis. The cause was the gantry of X-axis can not move smoothly. The...
OK,
Set up any parameters on port& pin?
Mongkol
Al,
Thank you for the reply.
You mean that it's not necessary to set up any parameters on port&pin?
Connect same as stepping motor system? yes or no.
Mongkol
Tivoidethuong,
Thank you the reply. I know servo driver have step and direction but I don't know how to connect encoder with BOB and mach3.
How to set up configuration,port and pin on mach3?
...
Dear All,
I am little puzzled with servo motor and mach3. I know mach3 need pulse and direction to control. Stepping motor,It's not difficult to connect.I know
For servo motor, I don't know...
John,
Have you ever engrave on the stone? I found this machine on youtube.
It can engrave the image which you need on the stone.
I think it's challenging for you.
YouTube- ‪CNC G-10...