I got a full unlocked one week trial from my local reseller.
Type: Posts; User: cncpilot
I got a full unlocked one week trial from my local reseller.
After installing 1780, BCC would not launch. Running XP SP3, my maintenance just ran out so not sure if that has anything to with it.
Thank you for the link. I didn't see it on their website.
Hello, I need build 1595 file update. The new build won’t work for me so I need to roll back to 1595 but I didn’t save it on my computer this time. If you have it you can email me at...
You should have end of program M code that will reset the program to the beginning. Format 2 is M30 or M2 with the % sign after M30 or M2, the % sign should always be the last thing at the end of...
Thank you Neal, I removed the A and B offsets and wah’la… the program went through.
Thanks again
The Fadal user manual says (This was drawn in the XY plane)
G17 is (XY)
G18(XZ)
G19(YZ)
Is this wrong?
Regards
Please help, I keep getting an error message on my control CNC 88HS Format 2 when I try to run this program. "FIXTURE OFFSET MUST BE APPLIED WITH G0 OR G1 AT N25" not sure what to do here. Please...
Call Onecnc and ask to run their evaluation. That should give YOU a better idea of the look and feel of the software. They run there evaluation on a server, you will be given a user name and password...
Thanks again Steve
I'm having trouble posting good code with bobcad v23. I have tried all of their format 2 post's with pore results. I could use some sample code that I can use to edit the post and or a good working...
Yes, that is the case Steve (thanks for clarifying). I need examples of post's and or code with tool changes and rigid tapping.
Regards
Keith
Hello, I'm looking for a good working CNC 88 format 2 post processor that someone might willing to send me.
Regards
Thanks for the advice Steve, I'll look into Mecsoft.
Looks to me that onecnc XR3 expert has more features than Alibre expert cam for about the same price but I like that when making a change to the part in Alibre cam the tool paths will update. Not...
I upgraded from pro to expert. Great deal. I wonder if Alibre has sales on CAM.
I agree with Neal about the 1030 board. I just replaced a 1030 board in my 94 VMC 15. You can run a diagnostics test on your 1030 board from the control if you have a test plug, there might be one in...
I just purchased a 94 VMC15 with cnc 88HS. I was trying to upload my program but it would not upload. I used Predator and NClink for the com. I found the test plug in the cabinet and ran the test...
Thanks Neal
I'm looking at purchasing a (1994) VMC 15, but I need to remove the z axis servo motor and spindle motor wire loom, to fit it threw my garage door opening. Just wondering if there is anything that I...
Thanks for the reply. I'm going to take a look at it sometime this week. I hope it fits in my garage.
1991 FANUC DRILL MATE T-MODEL T10B ALPHA, 10 TOOL TURRET, TYPE A04B 0059 A001, 7.5 HP FANUC O-M controls. I need help, is this good option to run as a full vmc, I mostly machine aluminum 2 1/2 and...
If you push and hold the PrtScn button on your key board for 1 or 2 sec, it will save a jpg image of your part that you have open in the BobCAD/CAM program file image folder by default. You can...
Close, it’s a rear brake rotor cover for my dirt bike; I'm using V23 too but never had the chance to use any versions before it. Thanks for the replies.
Are you using Bob cad for drawing or are you using some other cad software? I used Bob cad to draw this part but it took about 4 hours, still learning bob cad and have been looking at other CAD...
onlinemetals.comhttp://www.onlinemetals.com/merchant.cfm?id=266&step=2&top_cat=131 I have used them to purchase aluminum they sell titanium too, there located in Seattle.
Thanks for the diagram. This will be help full.
just wondering who you ordered your power supply threw? I too have a bad power supply in my sx3 and need to order a new one.
Thanks for your help mike.
Works great.
I just purchased the 4th axis for my x3; it came with no wiring instructions. Dose anyone have the wiring diagram?
Thanks
Is Predator Pro for BCC worth the extra money, or would money be better spent on tooling or something more productive? I’m new to CNC, I have a Syil X3 bench top 3 axis milling machine that is...