Search:

$3500.00

I'd be happy to help you with it.

I am up and running. I am now an expert with Milltronics, Ajax, and Mach 3. I now know as much about Ajax as Ajax does. It would be far easier to build your own controller, than to try to get help...

What would be a good tool to engrave steel? I tried scratch engraving with a carbide tool, it burred up the surface. What a carbide cutter be better?

"run from here" only works with lisenced copies of software.

Here is a Brain that will enable fast jogging when holding the shift key.

http://www.ajaxcnc.com/ajaxbb/download/file.php?id=210

Copy this to your c:\mach3\brains directory and then enable the...

You can use "Reference All". In Mach select "Operator" -> "Edit button script" -> click on the "Ref All' button when flashing, remove the exisiting code and insert: (copy and paste only the text in...

The Milltronics 4 controller is not PC based, but it does have a D size battery on it's board. It's located on the top right, inside of the door. It's a 1-1/2"x3" aluminum box. Replacements are...

When homing, M92 P11 Q12 R3, first axis zeroes and then machine stops. I get no movement from y or z. Also M92 P12, or M92 P3 gets no movement either. Is this a brain problem, or M92 Macro?
Thank you

My emails have gone unanwsered.

I'm still waiting for a reply. I hate being spoon fed install information that should have been supplied. It was claimed plug and play, but it's not.

How did you hook it up? I can't get any help.

It was a factory miswire. I found it and fixed it, but I still can't get the controller to run. Now I have a commuication error from computer to controller.

Yes, thank you for your help.

4 months now, and I still can't get it working.

I have a Milltronics Pardner 4 that I fitted an Ajax Mach3 controller to. I need a pinout for the original inverter, so I can wire it to the controller. I can't tell what brand it is, but the model...

The Kit With 3-Axis DC Servo Drive. I am suposed to be able to use my original encoders, but they don't seem to work. Scott has been great. Documentation is poor and vague. This should be a simple...

Yes you can.
DC1 - Single Axis Servo Amplifier- MPU11/Mach3 Based systems ONLY
Our new single axis add-on drive allows you to add MULTIPLE axes to a DC3IOB/MPU11 based systems a single axis at a...

Yes, think you can.

What did you do?

I went ahead and bought the Ajax Mach 3 conversion. I've been working on it for a couple of months, and can't get it working.

I'm doing a Milltronics retrofit right now. Keeping old motors. About half done. Using Ajax with Mach3.

Do you still have it for sale?

I pulled the whole controller out, and it is now for sale. Cheap.

I see on the Ajax website that two types of retro kits are available. A Mach3 and a Centroid. Are any of the conversion talked about here, done with Mach3? Is the Mach3 conversion any good? I have a...

Machine was working OK untill we had a power outage, now machine won't work. Powers up, but screen is blank. Controller won't work. I noticed the power supply wasn't working. I pulled it out to check...

Milltronics Partner Centurion 4 control. What software programs will download to that controller?

Can I replace the controler with something else?

I'm not really having a problem with the monitor. It's the machine that won't start. When I hit restart I get nothing.

I wish the Centurion 4 didn't use a monochrome monitor, then I would replace it with a flat screen like you did. I'm going to pull the connector plugs and clean them. See if that helps.