G0 X62.345 Z6.45
G75 X73.025 Z-35.243 I1300 K2540 D572 A60
F3.275
(ISO MM)
Type: Posts; User: waer
G0 X62.345 Z6.45
G75 X73.025 Z-35.243 I1300 K2540 D572 A60
F3.275
(ISO MM)
http://www.cnczone.com/forums/haas_lathes/127942-hass_tl3b_bull****.html#post938118
As promised, back with photos of how we deal with the vibrations that occur in threading.
So I bought one Replace Dorian from a company in China. It is much stronger and much more. You can use all...
Use oil to the main axis..
here's a variant:
#100=36 (NUMBER OF HOLES)
#101=360/#100 (NUMBER OF DEGREES IN INDEXING)
#102=0. (METERING A AXIS)
G0 G90 X0 Y0
G43 H01 Z150.
M97 P1000
G0 A0.
For those interested: good results at the inner threading thread type IF, API REG I got the tool in the image (SECO)
This is only a temporary solution, because those at the Haas :argue: tried to show me all the tools used are not suitable or cutting procedure is incorrect, in no case will recognize that the...
I solved the problem. At least for internal threading. We built a device attached to a solid we Sandvik 60mm bar and can tap easily.
Those from Brussels Haas sent me a block of metal .. they said to...
I have a TL3 and TL4.
Both pieces were purchased for processing in the oil field and both are some misfires. Especially when used with socket type devices Dorian.
In short, give you a tip: if you...
Watch out for HAAS TL3 B!
A problem ST20 (equipped with live tools) is that G77 cycle is not working although it makes no reference to this. Haas technicians shrugs Ask them or at best say that he is still working on this...
Of course, including G32 and G92 variants cycles.
Sure, I used a 60 mm bar, but without results.
Recently, I tried the same type of thread, but outside, at a distance of 700 mm from the main spindle, the material being supported by steady rest and...
All my attempts to make a internal thread 4'' 1/2 IF on a lathe HAAS TL3B failed.
We used the latest tools Sandvik (inserts and antivibration bar), but in vain.
Any regime would try cutting,...