changed out the fan, this didn't help any, might have to try to get different axis drive and see if we received a faulty one, it just seems hard to believe that we would receive a drive that would...
Type: Posts; User: glp
changed out the fan, this didn't help any, might have to try to get different axis drive and see if we received a faulty one, it just seems hard to believe that we would receive a drive that would...
Ok will do, would this make the error switch from the x to the z?
This has the alpha drives, there is a power supply amp, spindle amp and a servo amp, i am not sure what you mean by a 2 in one axis or individual axis drive. We are going to try the fan on Monday (we...
It is a fl1 and it has the msc521 controller (not sure if it is the same as the 21t) It happen sometime when power up and sometimes while running. it seems to happen most often when powering up. I...
The servo amps on the machine are fanuc, we purchased the amp and the boards from a re-manufacture shop. We are going to replace the spindle motor fan next, this is in line with the servo amp on the...
We have a mori seiki frontier Lathe that give an intermittent 414 servo alarm, we have changed the Cpu board, Meged the motors, replaced the servo Amplifier and still no luck. Sometimes it will run...
I am also recieving this error on my machine, do you have the phone # for EMI that you talked to for the replacement boards and software?