We have a Sharp 2060TC with an Anilam control.We had an issue the other day where the tool post froze. Talked to Sharp and they sent me the procedure to adjust the post which did not solve the...
Type: Posts; User: javajesus
We have a Sharp 2060TC with an Anilam control.We had an issue the other day where the tool post froze. Talked to Sharp and they sent me the procedure to adjust the post which did not solve the...
I have a Strippit 1250-30-1500 with the hecc 80/3 control. We are having a bugger of a time getting the machine to run a program that we upload to it. Can someone supply me with the proper comm...
After staring at the electrical manual for awhile, I did figure most of it out. However, not wanting to cook anything, I called the machine tool tech guy. Basically, what he said was that the lathe...
there is a gentleman on the PM board that goes by mthoume I believe that has T2 manuals that he copied for me. I am sure that he would do the same for you. Just do a search for QT15 manuals.
Thanks guys, that did the trick. I had a couple of " Interference in CRC " errors but I was able to work through those.
Tim,
It is an outside radius with a radius cutter the tool path moves from right to left so I guess I would need to shift the path to the right on the Y axis.
Dcoupar,
I will try this. I...
I am hoping someone here can help me. I have to use some cutter compensation in one of my programs ( the radius cutter had to be replaced, now it has a larger diameter) I have read the manual and...
Jamman,
Anychance you have the programming and operations manuals with your T-2? We are in bad need of them and are willing to compensate for copying or postage or whatever. Mazak are a bunch of...
I know that this thread is old, but I am getting a little desperate. I am looking for any manuals for my QT15 with a T-2 control. I have the electrical and maintenance, but thats it. If anyone can...
Brandon,
I am looking for programming and operations manual for a QT15 with a T-2 contoller. Any chance you have these and are willing to part with them? We are willing to pay.....
I'm not sure where to post this, but since I have a Mazak and this is going to be used on my mazak, I thought I would post it here.
We just bought a used SMW Spacesaver 12.65 Autoload barfeeder...
Mike,
Thanks for the info. I have seen this video and was considering buying it. I was just waiting to see if there were any other responses. I think I will give it a shot. Thanks.
Thanks for the info. I will look into it.
Ok, SO I am a bit needy tonight. Does anyone know where I can find the blocks that hold the tooling on the turret for this QT15 machine? It has an 8 position turret. Thanks again.
We just got our new to us Maak QT15 today and I was disapointed to find that it only came with the electrical, maintenance and 1 chapter of the operating manual. Does anyone have these in a PDF or...
Can someone point me in the direction of a good, but fairly inexpensive training video for X2 lathe? I use solidworks for the CAD portion and need to learn the X2 lathe portion. Any help would be...
Well, it's been almost a month since I added the dwell and it seems as though that has fixed my problem. My machine has not missed a beat since adding the dwell and the small delay is almost...
Thanks for the reply. I have verified that it has the ability to run G code. Do you know how they are at tapping?
Hello all,
we are looking at purchasing a Mazak QT15 w/ the cam T2 controller. I am a little confused after doing some reading on this forum. Can I program this machine in G code? or do I...
FM is great for music but I can't get Rush or Glenn Beck on FM :(
Ok, I have pretty much resigned myself to not being able to listen to the talk radio on AM around my machines. I guess they put off too much RFI. As soon as the servos kick in, the noise is...
I got my dwell down to a 1/2 second to where it's almost not noticeable but is still a little. I am going to play a bit and see where I end up. The repairman's theory makes sense to me. It could be...
Sorry to hear that you are still down. I had a little scare today when my mill lost home. Turned out to be a chip hanging out on the prox switch on the X axis. I did talk to Ed at Sharp regarding...
Can anyone point me in the right direction to obtain a post for an anilam 4200T for mastercam X2?
I'm jealous. We have the 10 tool magazine, but it is our first one. We are already shopping for another. I think I know what switch you are talking about. There are 3 on the magazine that I could...
Spock, When you say cam shaft, where do you mean? On the magazine? Also, do you have the 10 tool magazine? I was wondering if the hang issue was a faulty switch or just software moving too fast...
Well, the mill ran ALL day without an issue !!!!! Woohoo! Spock, next time you are in Spokane, WA, the drinks are on me. Thanks to all for your help. I was able to get the dwell time down to...
Hopefully just a dirty proximity sensor in the magazine. Keep us posted.
Spock, you are the man! I will give this change a try in the morning and see how it works out. I will run a little program in a loop and see what happens amd post my results as well.
PBMW, I...
My symptoms are the same as Spock, but we have the OI-Mate-MB control. I thought electrical noise might be the problem too, but we just moved the shop and had the place professionally rewired. ...