Search:

Looking for dxf files for any skeleton models of dogs. I have the daschund model which have both CNC router and laser carved.
Thanks

Really like this horse. I also would be interested in the vectors or where to obtain them.

Jeffery926, thanks for the reply and suggestion. From photos and description, this probe appears to be same as the Performance Motion (which is $15 less at $185). Hoping to have input from an...

Can anyone provide their experience with either the Performance Motion or IMService TP-100 probe? They appear to be similar or the same. Don't have full specs on the Performance Motion for...

Robert, thanks. That's quite a barnyard of pigs. I cut the model in 1/4" ply and was able, with a little trial and error, get it assembled. Thank goodness it did not have many parts. Thanks...

Does anyone have assembly instructions for the sliced pig model they could share? Drawing attached. Also if anyone has anyother pig models, sure would appreciate.

Thanks for the plywood replies. What is source for furniture grade plywood?

Wondering which type of plywood is best for building skelton models? Is the plywood from the "big box" stores ok or do most use a better grade? Sources? Appreciate your input.

Wondering if anyone has used imservice's TP-100 probe and comparison to the Wildhorse probe? Imservice has a special going and would like some feedback. Like the size of the TP-100 but it is twice...

Finally had to file PayPal claim as after numerous attempts to contact Wildhorse Innovations without any reply. Funny they responded to PayPal within a day. Order was cancelled and PayPal refunded...

Probe was "in stock" when I ordered and they sent email that unit would ship. Guess I'll have to file a PayPal problem report for non-receipt of goods.

I ordered the probe from Wildhorse and have not received yet. From all posts it appears users are satisified with it. My problem is that I can not get the folks at Wildhorse to respond to emails or...

Ken, thanks for the info. Very helpful. Would you (or anyone else) have a pig.dxf. My son-inlaw runs a BBQ place and would love to do a pig for him.

Not in AZ, am in GA, however if you have not checked out Joe'sCNC forum, highly recommend that you do so. Members, as on CNCZone, are more that happy to provide assistance. I built JoesCNC R&P...

Just finished building a JoesCNC R&P router. Been doing some V-carving and 3D using Aspire. The models cut out of 1/8" pylwood are very interesting. Couple of questions from a novice. How do...

Problem solved. Basically had to uninstall/delete everything and start over. Greg at Warp9 was of great help. Here's what he sent me and it worked. Maybe it will be of help to someone else if...

Running XP Pro. Have SS and PMDX-126 BOB. When going through the 'New Hardware' routine while installing driver up pops the message - "The file 'ftdibus.sys' on FTDI Disk is needed." I'm unable to...

Big-Tex,

Read through the entire thread, however have a couple questions for clarification - What is latest version of Mach3 you recommend for the screenset? Is the current lockdown OK? Do you...

Recently purchased Joe's plans. Friend of mine built the regular hybrid 4x4 version. After studing the plans and spending alot of time on his forum, I decided to build the R&P version with a welded...

Looking at possibilty building Joe's CNC router. Are there any fellow CNC'er's out there in the Atlanta area (within couple hundred miles) who have built this router? Sure would like to make...

Have found most info as included in Model Engineers Workshop by G. Thomas. His is 10" max width. Thinking about designing one about 18" max witdth. Wondering what size rollers you used for the 24"...

I like Dolphin's PartMaster. Does a good job for me once I got over the initial learning curve.

Load an earlier version of Mach3 and see if you still have the problem. Had similar problem when I loaded latest version. After much hair pulling, asking for help, etc. reloaded Ver32 and all works...

I like Dolphin's PartMaster Lathe. Contact them for hobby pricing.

Take alook at the sdp-si site. Will answer all your questions on pulleys, belts, etc. For my 4th axis I am using two XL pullies (a 72 and 17 tooth) for the reduction. On my setup the spindle dia...

I'll send you the files via private message that I use for 4th axis. Tried to attach to post but got invalid format message.

That did not work either. Send me your email via PM and I'll get back...

I recently finished conversion of the G0602 to CNC. Note from the photo (early stage) I took a slightly different approach by removing gear box entirely and mounting floating end in bearing block. ...

Your screen shot for NFW showing 8 rpm at 75 ipm looks a little funny. Here's one that I ran which for 0.5-2F endmill shows 3820 rpm at 12.6 ipm.

Here is a recent 4th axis completed using timing belt. Works great.

How about sending me your Dolphin Partmaster Cad and Cam files and I will take a look at them.