501,631 active members
8,264 visitors online
Register for free
Login

Search:

Type: Posts; User: Hemikiller

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    95

    Re: Request for operation manual

    Joe,

    I have no connection to Lapis, the link just posted that way. They have many of the Amada user and operator manuals posted on their website.
  2. Replies
    3
    Views
    95

    Re: Request for operation manual

    Operations manual attached.

    Some links to parts books and info below, what applies depends on your serial numbers.

    Amada Turret Punch Press Parts Books PDF. Amada Press Brake Parts Books.
    ...
  3. Re: Manual book Amada RG50 with DC-9 II controller

    Sorry, can't help you with the diagnosis. I've never personally run an RG with that controller, ours were Autobackgage 99 and NC9EX II machines, don't know if the one you have ever came to the USA....
  4. Re: CAM software recommendation for CNC Turret Punch?

    This is the least expensive programming software I know of....


    SketchLine Technologies-The Sheet Metal Cad Cam Software Solutions
  5. Re: Fiber Lasers...who makes the best? Mazak? Bystronic? Trumpf? Mitsubishi? Other?

    AFAIK, all the Amadas are open and can can accept standard text format programs, so you can use third party programs like Radan, SMP etc. At my current place, I program our EMK with Merry Mech SMP....
  6. Re: Manual book Amada RG50 with DC-9 II controller

    Here is the operator's manual.
  7. Re: Fiber Lasers...who makes the best? Mazak? Bystronic? Trumpf? Mitsubishi? Other?

    +1 to Paul's response. The nesting software can make all the difference. Dr Abe has a learning curve, but once you're up to speed it's very good software. I used Dr Abe Blank for four years before...
  8. Re: how to support expanded metal steel sheets in laser cutter

    We punch a bunch of 18ga expanded metal on our old Nisshinbo turret and it has always been a PITA. We've reduced ourselves to shearing the 4x4 sheets down to 24x16 and run it as a single part, no...
  9. Re: Manual book and hydraulic diagram Amada Shearing H-3013

    Here's the hydraulic diagram for the late machines
  10. Re: Amada Promecam APX100 getting into BIOS settings

    Bought parts from you guys in the past, always spot on.
  11. Re: Manual book and hydraulic diagram Amada Shearing H-3013

    Operator's manual, what is the production date of the machine?
  12. Replies
    7
    Views
    389

    Re: Fanuc 6M macros and subprograms Newbie

    Macros in an Amada are written by the user. The oldest machine I've worked on is an Aries 245 thick from '88 and they have all been the same. The user writes a program that includes a punching...
  13. Replies
    7
    Views
    389

    Re: Fanuc 6M macros and subprograms Newbie

    Macros in an Amada are written by the user. The oldest machine I've worked on is an Aries 245 thick from '88 and they have all been the same. The user writes a program that includes a punching...
  14. Re: Amada Promecam APX100 getting into BIOS settings

    Your best bet is probably to send a PM to "AmadaJoe" here on CNC Zone. He's an ex-Amada tech and operates Alternative Parts Inc in the USA. Extremely knowledgeable guy.
    ...
  15. Replies
    6
    Views
    719

    Re: NEW AMADA EG-AR 6013 PRESS BRAKE ROBOT

    Might also help if you are using a turret with air blow, to turn it off when punching these parts and have the operators wipe the sheets down prior to breaking them out. Had to do that on some 24GA...
  16. Replies
    6
    Views
    719

    Re: NEW AMADA EG-AR 6013 PRESS BRAKE ROBOT

    We had lots of problems like that as well. I thought that had a vibe or air blow part separator solution for the newer machines. One method we used was industrial velcro to act as a stripper. We...
  17. Replies
    4
    Views
    275

    Re: Amada Aries 245 Memory Overflow

    Been a while since I worked on an Aries. We used to have that problem as well and I would just do subprogram calls rather than macros / multiples programming. Multiples just slows the machine down...
  18. Replies
    6
    Views
    719

    Re: NEW AMADA EG-AR 6013 PRESS BRAKE ROBOT

    I worked with an Astro 100NT/HDS for seven years starting in '07 using AstroCAM. It was buggy as well, but you get used to it. Just be patient and you'll get the hang of it. I made sure to report...
Results 1 to 18 of 18