Only got around to actually useing the machine - spindle spins anticlockwise.. which wire / setting would I change to make it spin clockwise?
As a quick fix I’ve just been jumping the fwd and cm...
Type: Posts; User: ih8dug
Only got around to actually useing the machine - spindle spins anticlockwise.. which wire / setting would I change to make it spin clockwise?
As a quick fix I’ve just been jumping the fwd and cm...
https://uploads.tapatalk-cdn.com/20201227/e8bcd9ac5a60bf1b6ec11913f4e6e092.jpg
I did get x y axis movement when I first wired it up - that was via Ethernet cable direct to pc. After seeing that I...
Impulse bought a novusun mpg kit..... long story short If you want to waste a few weeks of your life on something and be in a worse position then you started, it’s perfect -
Ended up getting a...
If it helps anyone else, just wire it as per manual and you set mach3 Ports and pins to Eg;
port 2 pin1 (not 11 or I1)
The screens broken and she’s pretty rough, it’s a old machine I picked up awhile go, I mite just replace it - anything you would you recommend?
To potentially save me a few weeks how exactly did you wire it?
I can get the led lights on the board to light up but I can not get It configured with Mach 3?
That got it turning on and off. Can control the speed from the inverter but no control from Mach3.
When I turn it on in the software it says “Pmw bumped to minimum settings”
My ports and pins...
Just picked up a axbb-e board http://libraries.sharpsoft.com.au/manuals/AXBB_E_manual_web.pdf
I have everything working but can not figure out how to connect a sunfar e300 inverter to it (the pins...