The reason your not finding any above 5 inches or so is because once you get above that its hard to keep it rigid. The only way I could see getting 12+ inches of x travel would be to move your...
Type: Posts; User: aus10eww
The reason your not finding any above 5 inches or so is because once you get above that its hard to keep it rigid. The only way I could see getting 12+ inches of x travel would be to move your...
Im not sure if I fixed the problem but i got around it. When I first start up the machine the z still moves in the same direction, but if i go into outputs and switch the pins of the z axis to 6 and...
The motors are 8 wire so the linistepper would work. What voltage would you recommend running them at?
I've got two old stepper motors for an old cnc lathe that need new drivers. the only specs i can find are:
Powermax
P22NRXC-LNN-NS-00:
Torque: 238
Resistance parallel: 0.78
Current parallel:...
Would this Probotix driver work for my steppers.
Probotix Driver
Bi-Polar Stepper Motor Microstepping Chopper Driver
Chopper Current Driver
.5-2.5 Amp Current Limiting
Dual...
Does any one know how I would go about wrapping text around a cylinder in bobcad v24 such as a baseball bat.
My homemade machine was working fine and then all of a sudden the z axis wont changed directions when jogged. nothing in the wiring or hardware changed so im guessing it is something to do with...
so i messed around with it a little more today and what i have found is my y axis works totally fine but when i try to move my x to the right the z moves and then the estop comes up. when i move the...
I've almost got my first cnc router up and going. then all of a sudden one day Mach3 started to say "external E-stop requested" even when i take button off the breakout board. i have checked...
After a few days of s
earching I found the floppy and the instruction binder in a back closet of my high school tech ed wing.
i may have the floppy around somewhere if i find it ill let you know. I converted mine to run g code so i no, longer need it.
Could any one give me a driver recommendation for steppers with these specs:
P22NRXC-LNN-NS-00:
Torque: 238
Resistance parallel: 0.78
Current parallel: 3.1
V: 2.418
Watts: ~7.254
Inductance...
I just picked up a CNC lathe from my high school for free the other day and im wondering what my options are with it. From what im told every thing works but all i can get to work is the lathe motor....
I just got my Keling 3 axis cnc kit today, it has 425 oz-in stepper motors, kl-4030 drivers, and a 36 volt power supply. I have the motors are hooked up in parallel according to the schematic and the...
Hey everyone,
I'm just getting into the CNC world and am just about ready to build my first 3 axis Router, but I'm having a hard time choosing a kit with steppers and drivers with the breakout...