Hello,
problem solved.
When first electrician was in my company, he connected his encoder to check is there a problem. When he egain replace my encoder, he made mistake with connect two...
Type: Posts; User: witbike
Hello,
problem solved.
When first electrician was in my company, he connected his encoder to check is there a problem. When he egain replace my encoder, he made mistake with connect two...
Maybe somebody can help me what is the message: 9145: No T-Coincidance.
Where is refer position? I have not any manual, and can not check this message.
When I made restore PLC, turret start stopping in some position. When I push the button turret make one spin and stop. When I change tool in MDI, tool turret stoped in random position, but near...
Have you any photos of this? I still not solved my problem.
It is HH 415 BR. Drives FANUC. Sometimes, but very rarely on PCB show LV LED. Machine is connect to 3phase. I have 3 other machine which working fine.
Hello guys,
I have a problem with my machine. When program (spindle, axis and water pump) started or turn off, machine sometimes showing a Gross positioning error... Sometimes when spindle rotate...
Hello,
I have a problem again. One year ago I had a problem with my machine. When I start on machine morning - I had Gross positioning error, and HC lamp on my PCB. When I started on machine again...
Today when I turned on machine and they staying with tool (without movement) show error: Movement monitoring error in Z
I have a Bridgeport VMC with TNC 410. Machine worked good, but starts showing the communication from title. When Z axis down with bigger feed (around 7000) stopped and showing this error.
I do not...
I have a Bridgeport VMC with TNC 410. Machine worked good, but starts showing the communication from title. When Z axis down with bigger feed (around 7000) stopped and showing this error.
I do not...
Pressure not to high because tail slow move on to the part. Body is being back when tail press on the part.
https://www.cnczone.com/forums/attachment.php?attachmentid=396358&stc=1
Hello guys,
I have a problem with tailstock in my Hyundai machine on Siemens 840C. When I move on tailstock (M11 M31) it back when should press on part... You know, it move on, touch the part and...
I have the same problem. You help me a lot. But when I programed a tailstock M11M31 tailtock moves and program do not start. This program line do not done. I can't start spindle. My simpe program:
...
But I have strange problem. When I start machine morning, after few minutes shows Gross Poositioning error (I Have a red led error HC on PCB...). Electrician change power supply on my PCB, capacitors...
https://www.rgbautomatyka.pl/en/a350-1001-t774-01-fanuc-id7189.html
Look it is this PCB
The second number on my PCB is A20B-1001-0770/04B
Hello guys,
I looking for PCB for my FANUC A350-1001-T774/01 . My is boroken. 2 electrician try to help me, but nothing of that. In RGB shop is this card for ~2000eur. Maybe somebody have cheper?
Thank you for answers. I tryed losethe nuts and set the correct position, but this head stood... I have to try again.
I contact witch fanuc. I can buy new PCB from FANUC :) The parts from pcb are available only for fanuc company.
But full nuber of my Hybrid is FA8303 4L4 AF19 2 - so erlier signs no matter?
MY PCB is A20B-1001-0770
Are you sure it will be good for my hybrid? There I can see only AF19 number
My PCB is A20B-1001-0770 if it is important...
Helo guys,
I write this thread becouse I need a help with hybrid fanuc FA8303 4L4 AF19 2 I can not find them on Internet. Maybe somebody from this forum can help with this part, Or maybe some...
http://www.cnczone.com/forums/attachment.php?attachmentid=376530&stc=1http://www.cnczone.com/forums/attachment.php?attachmentid=376532&stc=1http://www.cnczone.com/forums/attachment.php?attachmentid=37...
Hello I have a problem in my Hit 15 lathe. The drill is not in centre when I try to driling. The carbide tool was broke.
When I go to X=0 I can see the drill tool are a litle upper than axis... Not...
Hello, my problem was solved. In my 840C the directory can only hold in the region of 250 programs.
Hello again,
I have a cincinnati (1000). When the operator put off a safety key we have Gross Positioning Error 3D! Sometimes it is when machine change a tool... Safety key has some connect with...
Look on the photos. The path look good...
LOCAL/USER but in Automat a can't see programs.
When I try to create new the path started PC/LOCAL/USER and when I save it I cant see it on my program...
But how reset this path?? The communication from a title was when I reset NCK. When I wanted measure a tools or make a base was this error. When I turn off and turn on the machine this problem...
Hello guys,
I have a problem. The operator clicked some button and hide programs in automat mode. When I click "select program" I have empty list. I have a every program when I eddit them....
I checked every connectors and it look good. I disconnected them and connect again.
But why it is only when the machine is cold (morning)? The servo has normal temperature.
My parameter in 1110 is 0,2 today I change it to 0,3.