Search:

Sorry bout that

If I had bullion as in Gold, I sure would not be racking my head with this stuff either :D

Thanks for the input, Its greatly appreciated

So far I have gotten around the problem be using bullion function and combining all the features into one ball of a model

I will most likely have...

Is it a solid bullion Intersect?

I cannot seem to find a "Merge" on any of the pull downs or training disk

Ok, will try that, I been saving every time I do something

Thanks again!

W

Not sure if this Pic will work, But basically, I am no modeling Xpert

I recently upgraded to BobCad V30. The first computer I loaded it on was not powerful enough to run the software

So I had a...

Thanks Mr Burrman

Im quite sure there will be some issues when I get that 4th plug in

Right now, I am having a new computer in the works thats a tad faster than the one im on, and a better...

Heya Mr Burrman

you helped me a couple of years ago with a 4th posting issue on V26

Its working rather well, If I recall, I had to incorporate both your solutions
to a post Bobcad had sent me...

Ok Mr Burr, And any interested,

I did a test on .5 brass tonight

Im sure Mr Burrs mod to the model will be acceptable

Please note attached Pic id .5 brass stock, The final part will be...

Thanks, I did take the model apart and saw a lot of weirdness there

I always appreciate a second opinion

Thanks

Wayne

Mr Burr, That seems to work awesome cutting air!

I thinks some fine tuning with the feeds, That may just work m friend

I really pulled my Back this past Sunday, I have DRs appointment early...

Guys, Please stand by on this,

I had asked the engineer to keep all the fillets
at .032 so I could use a .0625 end mill, Apparently there are no fillets on this
part, and I have to re-do the...

OK, guys, Thanks a bunch

Will try some of those suggestions, I did watch the Vid yesterday V25 on Wrapping,

The group does chain select, and I went back and checked an old wrapping routine I ...

JR, Noticed double lines, I think that is what is giving me troubles, I do have one file that I had erased all doubles
and triples, But still getting no POST

That is why I came here for help
...

Attacments

Hello there, I been fiddling with this all day

I am going to attempt to attach 3 files,

1) part

2) wire frame part

3) Un-Wrapped feature

One other simple check is make sure the way lube tank is full, Or enough to make things go, Sometimes the
float can stick

Just a suggestion

W

Somebody may have left the rotary switch on the tape reader compartment to "1"

please make sure it is set to "0"

Waynno

One of the ways they rate these things is the secondary capacitors that kick in under surge,

Usually they say on the model if it is CNC rated or not

I am reading that other thread, And they...

Cant say for sure, But possibly somebody removed 4th/5th axis or one of many other options or accessories that could be added to that machine

one of mine, there was a Air/oil spindle option and...

I have a 25HP rotary phase converter that runs my entire shop, 2 Fadal mills and 3 Mori sieki lathes,

10+ years the only issues is the Phase converter itself has melted a couple of its own power...

The board has a ton of info, Parameter sets for nearly all of the early Yasnacs.
There are some schematics and info on how to set up communications, Repair
tips and preventative maintenance

I...

Hello There

Some of you may recall I had a message board that I would post some pretty good info for the older SL-1,2,3 series lathes

Well, I really apologize I really let the web site go so...

You can get it dead center by simple parameter adjustment, All It does is give a final count on final approach after it reads the zero notch in the encoder

I would have to look up the parameter
...

BobCad can be a sore subject, But I have a good post for V26 that drives the 4th fine

I have 2 Fadals, Small one man shop

the first is an older 90s model, Recently had a control upgrade
But to be honest, I really dont need a fancy new control for it

Its box way, Abd I use it...

Personally I would check or have a good electrician check all the transformer
taps to see if you are matched with tour shop power. I have read people right
off the bat wonder why a $2-3k spindle...

Good Job, I got some good paying jobs out the door, and sucked it up and paid
like $7k to have the same unit installed.

What software are you using, I like the multi axis moves this vid made

Try this, Plugs were configured backwards

Use your tester at the computer end, I will not operate on the machine end

You have to make a cable to communicate, Never Have I been able to go any...

Delete, I dont think my solution was a wise one, Thats quite a problem

I have replaced a couple over the years, Mine usually start giving out when ya do a circular type move
and they can shutter just enough to leave a bad finish, kinda minor imperfection in the work...