Search:

Proof is in the pudding. You think he took your parameters? Did you design this VFD? Or were you hired to program this VFD? I find it amusing that you claim these settings ae yours. Wow. So again...

Obviously you have an issue with john, who by the way took the time to help me get this VFD running correctly. John explained the settings to me rather than telling me to change this or change that....

John did not make the mistake I did. So lets let it be. Thank you again

John thank you so much for your help. I made some typos telling everyone what settings that I used. Sorry for any confusion. Thanks to you helping me my machine is running like new.

Mactec54 thank you for your help as well. JOHN did not give me incorrect information .I made the mistake of typing the settings in incorrectly. I do not think it is your place to chastise John for...

The settings that I posted contained some typos. Please forgive me. I cannot thank you enough for the time you spent on the phone helping me out. I am new to these types of equipment and because of...

Here are the settings that work
PD00=0
PD001=0
PD002=0
PD003=230
PD005=400
PD004=400
PD006=2.5
PD007=.0.20
PD009=15

I will send out a copy of what was programed.

Thank you for all of your help. Seems to be working fine now. Obviously I had some settings messed up. John went through them with me.

Thank you for all of your help. Seems to be working fine now. Obviously I had some settings messed up. John went through them with me.

I have been trying to get my VFD up and running properly for several weeks. Thanks to automationtechinc I can now operate the spindle at any speed. This guy is absolutely amazing. The knowledge he...

I am running from the VFD not the computer or Mach 3

Honestly this thing is driving me nuts.. One thing that I have seen on these YouTube videos is that when they change a value and press set the...

i made those inputs and still max rpm is7999 I think this thing is haunted

Curent settings are as follows
https://en.industryarena.com/forum/image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAU8AAAHoCAYAAADJ1G2kAAAQFklEQVR4nO3dMY7jyBUGYLYxh3DshbFYGBj4Ag6dbODAx9q7OJhgkgl9hE0N wo...

Those settings are correct still no luck

PD144 is set to 3000

PD144 = 3000

let me check that real fast

PD144 = 3000

Run by the keypad on the front of the inverter no problems other than I wanted to slow it down because I believe it was running too fast for the surfacing blade i had on it. I was checking settings...

I have the GDZ-80-1.5B 24000 rpm 1.5 KW 110V 400Hz 5ASpindle water cooled

20 Amp circut
This unit was running at Max revolution until this happened

It is rated for 24,000 rpm. I cannot achieve more 7,999 rpm any suggestions?
Any Help is appreciated

When running HZ registers 133.33 It is set to 400 hz 1.7 Amps

I bought a Chinese machine "1*1M LEAD CNC Router Machine Full Kit 4 Axis Mach3 1.5KW Water Cooled DIY CNC" Bulk Man 3 D off of Ebay

I am having a hard time with the initial setup of mach 3. This is all new to me so I am not well versed with the terminology

Anyone In The Louisville, Kentucky area that can help with Mach3?

I have a Chinese 1000x1000 CNC Router. USB connection set up for mach3. Is anyone here in Kentucky? Thanks

Is there anyone here that resides in Kentucky fairly close to Louisville that would not mind helping a newbie understand the processes involved in operating a CNC router?

Thank you

thank you. Do you know if it will run on USB?

I see a lot of machines offered on the web that require windows 7 or windows xp 32 bit operating systems. If mach3 runs on a windows 10 64 bit operating system i do not understand why the cnc will...