Search:

Should I PM you?

The password on the machine to view it is "L". Are there 2 different passwords, 1 to view and 1 to edit. Sorry for all of the newbie questions, I'm learning as we go. LOL

Update: So I have updated to the newest Ladder 3 and can successfully import the backup from the memory card, but it is asking me for a password that I do not know. Hmmmmmm, what to do now. Not sure...

Thanks for the response. Looks like I need to update. Lol

Hi guys,

I'm having a problem opening a .LAD file that was extracted from a 32i Model B control. Fanuc Ladder III v5.7 keep saying PMC type is not supported.
The machine is a Eurotech 735sl Y...

I have figured out how to access the ladder with the correct password. ;-)
How do I alter it to make it do what I want it to do? I have also backed up the PMC to a flash drive. Thanks

Is there a way to add an in-line flow meter and check the status of that via the program with out altering the ladder? I need to have a solution that will solve the problem of making the mistake of...

Hello everybody,

The control is a Fanuc 32i Control. My goal is to be able to check the status of the coolant pump via the program. The problem is that the only place that shows the status is in...

I take it the machine does not offer the "measure" option on the work offset page? If so, the typical sequence would be to pick up the center of the hole and enter "X0" and hit the "measure" soft key...

I've ran into my next problem. I set parameter #110 bit 0=1 to dedicate channel 2 (rs-232) in parameter #21 for sending DPRNT. I have my DNC on channel 0. I can read programs to the control with no...

Hey Bill, you are really making me look like a super hero here. All the solutions that you provided worked perfectly. There is no more delay now and the variable will be vacant upon pushing the reset...

UPDATE: I hqve made a lot of progress thanks to the help from this forum (attn: Bill). I currently have it working as suggested with the "A" variable and the M54 via program O9025. The only problem...

Yes, you are correct that the M54 is the index command. It is tied in to the machine via an aux M-code relay at the moment. The 4 pin wire is used at the Haas control instead of the DB25. My goal is...

I feel abandoned! LOL

Thank you very much for the quick response and help. If possible, could you give me a longer visual example of the lines for the main and the lines for the sub? I hate to be a pain but, once we start...

We have a YCM Supermax 1020xv with a fanuc MXP-200i control. The indexer is a Haas HRT-210. The company has been indexing for years by using only the 4 pin trigger and finish signal relay via M54...

I'm looking for anyone that knows how to unlock the tool life management feature on a "Yeong Chin Fanuc MXP-200i" control. Thanks in advance to anyone that can help. Have a nice day.