What problem you have?
Type: Posts; User: SovietTwins
What problem you have?
The best way:
Contact with manufacturer. They have backups.
Or find someone who have this machines too.
Third method - read manuał and write PCP by yourself. :)
If your CO2 laser Beam contour is not sealed now and lost all CO2 - than your tube is junk now.
If it have only damaged HV mounting pad - use good high temperature epoxy without metal.
Yes you can, but you must to select maximum current less. I mean - 70% of power will be the maximum. Your PS have a current bigger than your tube can to use right now.
90% - tube is over.
10% - dirty optic or not Adjusted.
You can to use DC measurement clamps over wire from PS to tube and check the current.
It must to be in range from 25mA to 40mA depend from...
1. The better, if your bełts will be not enough tight, then overtight.
2. Check movement by hand for big circle. If you haven't any troubles, or torgue change, then, your movement system is ok.
3....
Please, add some photo.
Just calculate P=U*I (Voltage on current).
40mA - is a VERY GOOD.
Actually, 40mA will kill your 130W CO2.
30-35mA - maximum
Will it help?
https://www.machsupport.com/forum/index.php?topic=16685.10
What budget you plan to invest in equipment?
That's strange.
Try to PM me again or wite me e-mail at terion(six_six_six (write three numbers))@mail.ru
Hello.
What do you mean, when you write: "prepare maintenance"?
Software maintenance or hardware?
Sorry for late response.
You should to configure your MD bits to read UMS correct.
Please, give me your ums models.
Your 611 is dead.
Right now, you should to open it, and check power IC's.
If you need to unlock any other options, for Sinumerik 810, please, write in PM.
Hello everyone owners of Sinumerik 800's cnc system.
A lot of times, i saw messages, which ask "how to" enable BTR/DTR/Drip feed.
I also saw Siemens forum, which some of members told, that this is...
Hello. See my post.