509,828 active members
2,927 visitors online
Register for free
Login

Search:

Type: Posts; User: deadlykitten

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: Machine Control Besides Mach and LinuxCNC with stand alone controller.

    hy, check these 2 links, kindly :)

    OSP-P300A is our intelligent cnc control // Okuma // Okuma Europe GmbH

    www.youtube.com/watch?v=C7_j4-lgmpU&feature=emb_logo
  2. Re: OSP5000LG ERROR WITH DRILLING CYCLES. PLEASE HELP

    hy ... i have all the manuals in pdf format, arround 20-25manuals/per single cnc

    if i wish to search for something, i use an in-file search, going through all in just few seconds

    i sync my pc...
  3. Re: Newest Independent two heads Carousel type 1637 ATC wood cnc router

    hy, if you wish to achieve further independency, then you have to remove the Y axis constrain; pls check video below

    maybe is not a must for wood, because blanks are rectangular / kindly :)

    ...
  4. Re: OSP5000LG ERROR WITH DRILLING CYCLES. PLEASE HELP

    hy, off course, both can use same code, because required motions are pretty identical; if you use the code with :
    ... drill+x_offset_0 it will drill
    ... face_grooving_tool+x_offset_<>_0 it will...
  5. Replies
    0
    Views
    13

    Re: sub spindle

    hy mr wizard, maybe he has a live center in it ?! m19 is not so powerfull; if i put an allen key inside a screw inside a jaw, i can diff m19 by 0.2-0.3*, but i diff 110+147 only 0.003*

    for such...
  6. Replies
    1
    Views
    13

    Re: Droop Control Okuma (G65/G65)

    hy jphk :)

    if you wish, pls check these 2 threads about splines on okuma :
    ... https://www.cnczone.com/forums/okuma/302486-mastercam.html
    ... https://www.cnczone.com/forums/okuma/309768-cnc.html...
  7. Re: OSP5000LG ERROR WITH DRILLING CYCLES. PLEASE HELP

    hy guys :)



    just like rcs said, g182 is a boring cycle; uses C axis, and M orientation



    it works because g73 = grooving
  8. Re: About 20 Months Later - Would I Buy Another One? - PCNC1100

    ... you seem to know your kitchen well; good luck :)
  9. Replies
    2
    Views
    19

    Re: ISO30 ER32 chuck question

    hy, notch type is there to assure that the contact is done in both areas : upper and lower; this is a trick to avoid uneven contact, at least theoretical

    downside is that using a notch type for...
  10. Re: About 20 Months Later - Would I Buy Another One? - PCNC1100

    what others do/think is their business :) this does not mean that i don't respect others, but i avoid thinking for them ... i can't :)
  11. Re: About 20 Months Later - Would I Buy Another One? - PCNC1100

    hy bob, i don't have time to read all, but all i can tell is that many shops consider buying another new/used machine, without considering 1st the possibility to increase productivity with less cost...
  12. Re: NEED TO PROBE A BORE WITH MORE THAN 4 POINTS WITH RENISHAW PROBE

    hi, for probing more than 4 points inside a bore, or, for contact points at angular positions <> 0 90 180 270, it is required a probe ( and software ) that is sensitive to cosine directions, thus can...
  13. Replies
    2
    Views
    43

    Re: NC look ahead

    hy stevie, this should be normal : a cnc is never moving at a speed greater then the program value, thus real feed <= programed feed

    a toolpath is a serie of geometrical entities, and the machine...
  14. Re: 3016 "new" (to me): excessive coolant splash leaving big mess

    hi, you are lucky :) a new machine arround here is leaking big time :) .... about yours, if you wil share a few photos, i may suggest some 'walls'



    send him a video / kindly :)
  15. Re: Having Trouble Rotating Hand Written G-Code w/ PCNC 1100

    hy mojo :)



    yeah, me too ...



    so far, i always believed that someone who is building a g-code over 'years' has machining background :) hmm, whatever
  16. Re: Vertical lines while engraving wood

    hy marioz, i was also thinking about a miss-resolution : for example, original bmp is scaled somewhere, before sending it to the nc, or after, thus during execution ?! depeding on scale algorithm,...
  17. hi, i believe rcaff is on the pizza today : it...

    hi, i believe rcaff is on the pizza today : it seems that the laser was still cutting during repositioning. Optimized repositioning should not deliver paralel lines. If possible, verify the...
  18. Replies
    0
    Views
    66

    Re: Multus B400 c-axis not accurate?

    hy, check geometry/alignment ... if you wish, share a photo with the fixture&tool, and i may suggest a few things / kindly :)
  19. Replies
    28
    Views
    3,646

    Re: please, help with local variables

    hey teahole, how did you do this ? pleasssssssse .... yes, i realized that this is cool only a few seconds ago :)

    can you remap alarm's type ? can you help me with this :...
  20. Replies
    18
    Views
    119

    Re: Page to view VS* variables

    hy, i am dealing these days with local variables, and i remembered this thread

    VS are local variables ( flashed on reset ), array type : for example, VS00001 = 1 and VS1 = 1 will target same...
  21. Replies
    0
    Views
    36

    Re: okuma slope machining

    hy 8laster :) i guess is nice if you have experience with multus & LT's; so far, i have never worked on such machines ...

    it seems that he uses G52, like it is shown in his other thread, but i...
  22. Re: Most impressive machining related builds?

    no, tom is the only one as good as tom, using youtube like tom does :)
  23. Re: lollipop endmill for milling a spherical socket

    hy :)
    ... 1 clamp ( faster & expensive ) : y lathe + lolipop endmill
    ... 2 clamps ( slower & cheaper ) : non y lathe + without endmill + custom fixture / kindly :)
  24. Replies
    0
    Views
    299

    Re: CNC Lathe G-code for cutting radius

    hi rcs :) yes, i see now, but this would deliver a different part, without the o28

    well, is ok 2 show how g76 works, but like superman said, it's old stuff, and i didn't see that / kindly :)
  25. Replies
    0
    Views
    299

    Re: CNC Lathe G-code for cutting radius

    hy rcs :) initial shape may not be suitable for g76L±2, because difference between diameters is 30-28=2, thus 1per radius, so :
    ... there will be a nice 'fit' for a circle with radius 2 ( >1 );...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4