Search:

Hello,
Please tell me how to call the subroutine in mazatrol so that it doesn't start me from leaving for the machine base.


He gives in the attachment two programs that are rewritten from the...

Jak napisać program frezowania wokół osi C, więc głowica frezująca obracać się co najmniej 90 stopni może zrobić sześciokąt?
Zobacz zdjęcie ...

Integrex i200 Mazatrol Matrix2

hello.in catia software with machining module part , sometimes dont display fully contained data....
because i have my screen too small probably and not show me full data and options i can have,...

Hello
How to disable barriers on Mazak Integrex 300-IV? I tried to commands M847, M660 but still one of the barriers is enabled.

How to change lower head home location to increase the distance...

G10 doesn,t solve the problem
I need to change permanently.

Hello.
While programming the rolling in ISO Mazatrol Matrix 2 tool with coordinates in the X10. sets the diameter fi20 instead set on fi10.


I need to know which parameter changes...

Hello. Could you give me an example of measurement tools with the drawing measured in detail for Mazatrol matrix 2 Integrex.

Can I ask for materials to learn to create and edit postprocessors in EdgeCam?

Thank you in advance.

Thanks

I am a novice engineer 5-axis self-taught.
I ask you for help, which turns on compensation in operations on 5 axes because I cannot find it?

Please screenshot if possible.

Hello.
I'm starting to program in 5-axis in Edgecam2014. I cannot find the option of the radial correction for end mill for machining in 5-axis. Where is this option if at all is that?

help!

Hello.
I have a problem with processing in revolving mode in G12.1 function on machine INTEGREX i-200 in the EdgeCam2014
I do not know if it's the fault of the machine or postprocessor because I...

Ok, but how to do to generate more toolpath at the top?

this option "morph between shround and hub " helps me .
thanks for interesting and advice

Hello.
It does not generate me a piece of the tool path on the shoulder of the rotor placed on the annex on the photo.
I tried all ways but now I have no idea. Please help.


Edgecam2014

Hello!


Would any of you have sample programs NC code in ISO to machine Mazatrol Matrix2 Integrex i-200.


I have a problem with the start of milling and turning because I don't know which...

see settings TPC

Thanks for the help.
I did not know that you can solve this problem "single quadrant."
I use Edgecam 2014 R1 so that's why my postprocessor didn't work.
Now I moved to Edgecam 2016 R1 and...

I tried also this way, tracks are not duplicated,but there are other bugs in NC code.
There is no R character at G2 and G3 code, so error pops up.
Look at the attachment, I I marked with a red...

I had earlier tried to change in Modal but it didn't help.
I have no other ideas, I have tried everything.

I have an error in the program after generate NC track becouse between Helikal interpolation and circular(?) 2D interpolation I have the same value of track.

I had changed in Helikal...