Search:

Get ahold of Haas or your local HFO with the ser.# and they'll have them.

I've seen it several times when I was a haas tech years ago.

It's the processor board.

Your processor board is going.

processor is toast.

X2. Also if you calibrate the probe the control knows where it is.

Get a hold of your local HFO or Haas,they should have the programs you need to run the probe.

Null modem cable will work. I've used them on several machines.

I'm interested in one or more of the drive cards. Could you send me pics and price?
Thanks, Stu.

I tried to zero reference the machine and I got a "z servo error loss of feedback or no motion detected on z axis" alarm. I opened the cabinet and found the o/c led on. When I swapped the boards I...

Thank you. Makes sense now. When I pulled the board I found the power wire for the servo motor was not installed correctly and had arced out against the standoff that holds the board. It looks like...

I have a Journeyman 425 that quit working the other day. I checked the y axis board and the red led that says o/c is lit. Could anyone tell me what o/c is. I swapped the board to a different axis and...

Call Haas with your serial # and they'll let you know.

You need decimal points after the feed rates. F300.

Check the Z axis prox switch.

I added a pic of the screen. Hope it helps.
Thanks.



http://www.cnczone.com/forums/attachment.php?attachmentid=280456&stc=1&d=1431815227

I was hoping someone could help me out. I fired up my journeyman 425 with a M30 control up today and I'm getting a "control unable to initialize communication with front panel" message on the...