Search:

have the cncest 6040 1.5kw spindle with the bsmceo4u-pp usb controller board.

BACKGROUND - YOU CAN SKIP THIS PART:
I've cut a boot for dust collection, did some cup holders with engraving, did...

one more tidbit... the way I'm finding zero on my work piece is to follow a long centerline jogging the machine from one end to the other on the y axis to ensure the workpiece is centered. does not...

thank you for your response sir.

generating tool paths in aspire using the mach3 output driver. Initially since this cavity has a 1 deg incline as well, I was using a rough and finish path...

thank you again. I'm sure there is a setting, just new to it so will have to consult the manual.
afa heavy cut... I changed my cut depth from .125 to .08 and still the sm issue but further......

thank you very much for the response. so... acceleration is in mach3 settings correct? I will check that next. I cut my pickup cavity (which is a box) after my initial botched attempt at the neck...

so, I bought my cnc knowing I'd end up here at the school of hard learning... fully admit it was a terrible idea to be a newbie and get this machine.

at this point... I've done 6 or 7 little...