584,850 active members*
4,187 visitors online*
Register for free
Login

Search:

Type: Posts; User: Frisian

Search: Search took 0.01 seconds.

  1. Re: Taiwan - SYNTEC - 6MB or 6MA - Controller Discussions

    Does anyone has a clue if it's feasible to drip feed the Syntec 6MB controller ?

    The main issue I've got... WinCE doesn't have a lot of performance. Processing a manual file import usually takes...
  2. Replies
    8
    Views
    1,257

    Re: Syntec 6mb controller issue

    When i was trying to install a new firmware onto our Syntec 6MB it was required to connect a USB keyboard at the front of the machine. So this might be a quick & dirty fix when there faults again....
  3. Re: Taiwan - SYNTEC - 6MB or 6MA - Controller Discussions

    The 6 series controllers were introduced some years ago, indeed. They're Windows CE based systems and ... by no means as fast as your usual desktop pc or notebook. It takes some time to simulate...
  4. Re: Taiwan - SYNTEC - 6MB or 6MA - Controller Discussions

    Our machine is slightly bigger, also equipped with a HSD spindle, model ES 929 which has it max torque at 12000 rpm. Rated for 20000 rpm and 7.5kw in continous use, peak 24000 rpm, 9,0kw. But we're...
  5. Re: Taiwan - SYNTEC - 6MB or 6MA - Controller Discussions

    6MA = 3 axis, max 1 spindle, max. simultaneous axis 3 ( X Y Z)
    6MB = 4 axis, max. 2 spindles, max. simultaneous axis 4 (usually X Y Z and additional C axis )

    We've got the 6MB, our portal X...
  6. Re: Taiwan - SYNTEC - 6MB or 6MA - Controller Discussions

    What's the major material you're processing with yours ?
    We had a production run of a few thousands parts in acrylic / PMMA. And too many parts were rejected by the quality control of the customer....
  7. Re: Taiwan - SYNTEC - 6MB or 6MA - Controller Discussions

    Its not a split-pinion nor a dual-pinion setup on our machine. As the machine is of chinese origin, I strongly doubt it to have zero backlash. Especially as it's travels are 3000 x 1500 x 300 mm....
  8. Re: Taiwan - SYNTEC - 6MB or 6MA - Controller Discussions

    Hi all,

    we're currently planning some improvements to our machine. Most of them mechanically... from what I can tell the backlash compensation features of the Syntec 6 MB on our machine aren't...
  9. Re: Syntec6MB - Tool change macro calls wrong turret pos after reboot Signkey Feho 15

    Indeed. Our machine came with totally inappropriate mains wiring which we had to replace directly.

    Also. Our actual fault... was caused by a broken lead to the servo brake of the ZAxis which my...
  10. Re: Syntec6MB - Tool change macro calls wrong turret pos after reboot Signkey Feho 15

    Due to whatever reasons I didn't got notified about the topics replies ?! :(

    As both of you mentioned it... it would make sense to share the macros. And I intended to share them here anyway. I'll...
  11. Syntec6MB - Tool change macro calls wrong turret pos after reboot Signkey Feho 1530WS

    Hi,

    at work we've got a Feho 1530WS CNC Mill which is equipped with a Syntec 6MB CNC controller.
    It has a rotary ATC with a capacity of 8 tools.

    Recently we've updated the CNC Controller...
Results 1 to 11 of 11