Since my next machine is not going to be a large one, I'm not worried about unsupported rails. So I'm going to add a support plate on the outside for the bolts to extend to. And then mount each side...
Type: Posts; User: WarrenW
Since my next machine is not going to be a large one, I'm not worried about unsupported rails. So I'm going to add a support plate on the outside for the bolts to extend to. And then mount each side...
Excellent idea! I know it may be overkill but based on John's comments, I would extend the top and bottom bolts longer and duplicate it on the other side. In otherwords, add a steel plate on the...
LetterCAM is reduced to only $49 for a limited time. Check it out!
http://www.LetterCAM.com
Video tutorials included
I do have a video on our web site showing LetterCAM in action.
http://www.LetterCAM.com
Check it out!
Hi everyone,
Not sure why PestPatrol tagged it with a pest. The file Lettercam21.exe is the install file created with Install Creator Pro. I just built a new install and checks out okay on my end...
I have posted a new version of LetterCAM on the web site with some new updates. The biggest problem was the software was showing it was already expired before it could be used. This has been...
Sorry about this. I'll take a look at it and fix it today. I'll post back on here when its fixed.
Thanks
Warren
Does anyone happen to know of someone that sells the end blocks for supporting and adjusting the pipes? I know I could make some but if someone has some that would be great. And I prefer metal.
...
Hi,
In another thread I saw someone post this picture saying they were going to use this v-grooze guide for their x-axis. Has anyone seen these or know where to get one at? I think I found...
Did anyone find out where to get a v-groove guide like this from?
Thanks!
Does anyone know good places to get the high density foam used for foam signs, mouldings, etc.?
Thanks!
Warren
If I set the tool diameter in Mach 3 and then load a gcode file, will the setting I added for the tool diameter override and stay the same and be used instead of whatever the gcode file has in it?
...
So whatever is set in the finish allowance is added to the edge of the toolpath? So your saying with it set as .125 Sheetcam will move the tool outward by .125 of the circle?
Thanks!
Hi,
I'm not sure if there is a setting for this but is there a setting to make the tool follow the toolpath but out a certain distance? In otherwords, if you have a circle being cut that is 4...
I am selling this router with everything including the controller, motors, router, etc. (not the computer) I have Mach 3 and SheetCam with it. The router is 45 1/2" Y and 56 1/2" X in size. It...
Thanks! I'm gonna backup the files today.
Warren
I'm using Mach 3 and actually just registered it today since it works so well for me. Can someone tell me where all of the settings are saved at meaning are they in files in the program folder or...
Hi Brian,
I'm getting ready to register Mach 3 this week. So does this mean I will get LazyCam with it when I register?
Thanks
Warren
I was thinking about engraving in a block of foam where letters are left in a box. Anyways, do I need to use a certain type of foam such as the density? Or can I use plain ole styrofoam? I saw some...
Just watched your video... that thing moves fast! And smooth like Jason said.
Post some more when you get more progress done.
Warren
I just watched the demo of LazyCam and it looks awsome! I use SheetCam to load DXF files and to create the toolpath because I want the inside areas cut first. Looks like this will replace SheetCam...
I was in Home Depot the other day and saw some interior doors made by Masonite that are two panel roman style with arches. A picture is attached below. If I had a solid wood door the size I need, I...
Hi Everyone,
LetterCAM is a new program written by myself for creating G-Code and DXF files from true type fonts. The program was mainly written for cutting out letters. The program is very easy...
I fixed it. If you hit cancel on opening or saving a file, it showed you hit cancel. I changed this and uploaded a new copy on the web site.
What action are you trying to cancel? I'll take a look at it.
Right now it only creates letters that are entered in LetterCAM. What format is the lettering from your other software?
Warren
The web site is up and released! If you find an error, please let me know ([email protected]).
As I have said before, I did my best developing it but would be open to suggestions.
sdantonio, I...
I actually JUST finished it with the last few features. But I want to test it out tonight and hopefully will post it online by tomorrow afternoon. I'm heading out to the garage to cut some letters...
Fodder1, right now it does not do this but I may work on another program to do this next. I may create one where you can add the outter shape such as a circle, oval, etc. or none and then have...
Hi Paul,
To cut balsa for an RC plane, do you need a laser router? Can it be done with a regular cnc router?
Warren
You could engrave using the software if you wanted. I mainly wrote it for cutting out letters but if people like it, I may expand it and add more feautres to it. Tomorrow I will be testing the...