Search:

This is pretty common problem on the Centre less grinders where the loader is used. Basically it is created by the regulating wheel when the part is sitting idle after the grinding cycle is done....

its there but not much, they even replaced a few things on spindle but chips still get into the spindle

as far as machining goes its fairly simple to calculate the machining times and for other charges ,include the shops average production expense per hour , depending on a parts complicacy and...

I guess MAKINO is a piece of junk ,we have 7 new MAKINO and all have the problems same as you ,we are getting lots of chips in spindle and already scrapped lots of parts ,and the best thing is MAKINO...

Recently our company bought 7 Makinos and we are having issues with chips coming into spindle which are causing problems on tools with less tolerance.

And MAKINO ENGG. have no idea how to fix it...

what m/c and what controller and what is the sequence of events when it happen

thanx Al

we have that key in place for editing .what im looking for is how to lock the programme using a password ,so that no body can edit the main programme.

can anyone please tell me how to lock the programmes on mitsubushi with meldas

can anyone please help me that how to setup alarms in programme on mitsubushi.we are using fanuc controler and #3000 does stop the mc but dont generate the alarm.

as the machine is moving in Z axis and showing repeatability so the steps should be what they are supposed to be.No back lash is there and even if the backlash is there steps are going down so even...

thanx ill try that and check for the cables.we are already monitoring the I/O for tool changer.

its TOYODA 800
and controler is Fanuc series 16i

we got GE FANUC 18i series
we are trying to make tool offset for the tool in spindle to 500.0 when the m/c stop for tool breakage alarm on that particular tool.Can anybody please suggest how it can...

can anybody help with this problem
we are getting system alarm on one of our horizontal machining center
alarm says
950 PMC system alarm
PC050NMISLC
its happening most of the times when...

im facing problems to fix the pitch correction in x axis in toyoda 800,basically its overshooting by 0.07mm at a distance of 930.0mm.we are using fanuc controler of 18i series.if someone can help...