Search:

Hello,

I got this machine from a friend of mine who closed up shop a couple years ago. Using Gravograph 98 software on it. He said it used to go back home after engraving but the computer it...

Yeah I know, I have even used faster but at the moment it was set as per the re-commissioning sheet that came from Hardinge.

11. CONNECT THE CABLE AND SET THE BAUDRATE: FOR 1200
...

Mike,

I didn't miss your point on your post. Your program is different than what I use to transfer programs with and in my program, there is no place to change what something is sent as. It is...

Actually the @123 code is a loop.

Re: If A < B, then jump, or else proceed

So in the code N22 @123 R3 R4 K-3 (R3 is A and R4 is B) So if R3 is less than R4 it jumps (K value) to that line...

Hello,

I have just re-commissioned our CHNC-I lathe and got all the parameters back in it and got it all back operational after it sat idle for over a year and the battery died. (Hame a Haas SL-30...

Best thing to try is a different computer as you said you had checked belts etc. Might want to pop into the K40 groups on Facebook also to see if can figure out the problem. There is good people in...

Not sure if you can etch those type jewels or not, I have etched glass with my K40. It is low power (3-4 mA if analog style K40) and a decent speed around 200 mm/sec if I remember correctly is what...

You still need? I did not see a PM

You still need? If so, send me a PM with email. Have a couple that may work

Hello, we are a Central New York based precision machine/fabricating shop. We specialize in high tolerance parts that are checked in a variety of ways such as cmm and the standard measurement...

Well I had a chance to see my friend and we tried the solution djr posted this morning. Turned setting 38 to 0 and unplugged serial cable to bar feed and hooked up cable from computer. No alarms so...

Mike,

Yes the cable should be fine as I have same cable and have used it with my VF-4. I don't think the pin outs are different between the mill and lathes as when I looked at manuals, they...

Mike,

Yeah he did try it and nothing. He told me that the Haas tech told him that port 2 was for them to load software on the machine or something of that nature. I think he bought the machine...

Hello,

I am trying to help a friend of mine with his SL-20 lathe so he can use the RS-232 to put programs in and out of it. The glitch here is his Servo Bar 300 bar feed is on serial port 1. He...

Thanks for the info. I was pretty certain it probably wouldn't work. So for now, I have just left out the # sign and ran the parts.

At least they were for something I build and not a big deal.

Hello. Have ran into an issue with doing some engraving on a part and was wondering if anyone can point me in the right direction.

Here is the code I wanted to run:


G47 G98 P1 (MFG #:...

PM Sent

PM sent with pricing.

Thanks

PM Sent with quote.

Thanks

Email Sent

Hello,

Trying to figure out if I can use another card that has the same exact sequence of numbers/letters except the last 3 letters?

Here is a set of numbers on a card: 6RB2025-0FA01 447 ...

Well I guess coming here to figure this out isn't going to work. All I wanted was some sort of an explanation on how to do it. Everything communicates just fine, I just wanted to be able to feed...

Hello,

I have a 93 VMC15 with the 88 control, I am not sure what cards are in the system but I believe they are stock for the year. I have been trying to figure out how to do DNC with this...

Steelworks,

Can you send me the Vicon PRT file? As I myself have a Vicon Machine and can probably help you out. I have fixed jagged edge parts all the time.

RJ

I was reading over this post and saw that you are all trying to do this in Corel. I use Version 8 for all of my stuff, but to join items together and format for Plasma cutting, waterjet, etc. I...