I'm using From Boundary Curves...I'm following the info in this tutorial video and applying the same strategy to a cylinder. The flat test appears to be doing what it should but the rotary doesn't....
Type: Posts; User: msmart
I'm using From Boundary Curves...I'm following the info in this tutorial video and applying the same strategy to a cylinder. The flat test appears to be doing what it should but the rotary doesn't....
Yes, you are correct...I do have Z movements above the material but not cut movements. I am using a 45 degree tapered tool (V bit)
I am trying to v carve (engrave) text on the circumference of a cylinder using a 90 degree V-bit (or 45 degree taper tool in madCAM). The toolpath generated does not appear to move in the Z axis,...
Agreed, seems to be a MadCAM issue. This only happens when I started with 4 axis work. I like most things about MadCAM, especially that it is a plugin for Rhino...and I own it. So as a workaround, by...
I thought I posted in the MadCAM forum.
MadCAM, Mach 3_4 axis inch post processor.
It moves smooth and quick as it should with a G0 A720
I just added a 4th axis, programmed and posted code. When I tried to run it the rotary axis motion was very jerky and I realized the rapids are made up of many short moves. Is there a way to...
Anyone know what an alarm AL-03 means on a 6I spinndle board? (A06B-6060-H007) Trying to get an old machine working, ad keep getting this alarm about 15 seconds after the control boots. I need to...
Is there anyone in the Akron, Ohio area using EdgeCAM? I'm an artist and art professor trying to learn EdgeCAM and CNC machining on my own. I have an old Acroloc (please don't knock it, I could...