Search:

Hi, So I can not find short or open line. This was working for a few minutes but would freeze on tool change with no error or same error. Suspect drive, is there a way to check with motionlink?

Hi overspeed is on the 4th axis, the one on top next to beaker, it is not used. BDS4.

yep, Overspeed is always on, so I think I might be looking for an open wire, or fuse. not sure what wire it is.? Is there a relay in this line?

Hi, I have 5 volts at spindle motor on each line Ma, Mb, Mc, spindle will turn a bit when try to align. After that Fault light will come on. That overspeed error is always on.? Undervolts comes on...

What version are you using? I can't find a short, would it be an open line?

Not sure if this is what I'm looking for? Running in windows XP on COM1.
503208

I have removed wires Ma Mb Mc and the fault light goes away, still have the over-speed on the drive. anyone have wire diagrams? Can hear spindle try to align but no movement.



...

Hi, can I have that post too please.?

Hi, is it possible to program Fanuc Arc Mate 100i weld bot with software?

Fixed it.

Hi, I need help to edit fusion 360 post processor, ANDERSON, (not the full line.)
The output it give me is T001 and G43 H1 with z move.

Need tool change is T101 for tool 1 , T102 to T110....

Hi, so I have this working now. tool change is T101 for tool 1 , T102 to T110. tools 2 to 10. on first spindle.

the tool offset is G43 H11 to H20 for tools 1 to 10.

Now I just need to fix...

Hi, thanks for the replies.
So far I have it going in correct direction now, set Z G54 (Ext) to -travel height. That gives me positive values in the tool offsets. So far so good.

But...

Right now my Z axis tries to move up when asking to move to g00 z-.25 . Z is at home position. I will post a program later. This is with original program that was in control. X and Y seem to be good.

487054

some screens

Hi, I was thinking this works the same as a milling machine, but I guess not. I'll have to dig into it some more, trying to use fusion 360 for cad/cam.

G92 is to set work g54 offset. I am totally...

Nope, still the same issue, what am I doing wrong?

Ho, maybe call Hx, tool offset, I'll try that.

Hi, on this Anderson Stratos Router, when I touch off the tools with M101 macro it will touch off tools to sensor that is sitting on top of table. then after it is done I set zero with g92 x y z . ...

My tool changer used Txxx the only difference. Also might try M197 or M194 on some controls,

Southern Alberta, Looks like my USB might be locked out.

OK, I am missing something, can't read from hard drive either, or save edited program, going to dig in some more..

Ok, got that working, now working on loading a file from the usb, can you help with that? why they make it so confusing?

Ok, one more , How do you touch off the tool for length setting?

Hi, This worked, Thanks. zavateandu
Now working on the tool changer and have a few questions. this is a Fanuc 0i control with 10 tool changer and 2nd spindle is a drill bank.

1, How to...

Hi, when trying to home this machine, it give me an over travel alarm, it is not hitting overtravel switches. anybody know how to fix this.? running on windows 2000.

Hi thanks for reply, OMG, found a short in the lasers, broken blue wire inside control panel. Now it is running, but I do not know how to zero/home it, set at metric, I am an inch guy. would need...

486080

We just acquired a Anderson stratos pro with Fanuc control running on windows 2000, giving us some errors, like FSSB error. Thinking it might be a setting from not shutting down properly ,...

well, I was getting ready to ship them today, unplugged all the wires, then decided to try one more time, plugged them back in and she started just fine...funny, What a Relief.

Ya I still have the work order for this, done by Mike Kilroy, Denis Norton., just might be the battery, if it has one, that little box was updated, will have to send them away again..