Search:

Hello. I have a '93 VF3 and have a spindle orientation problem. When the spindle tries to orient it spins too fast for the shot pin to go in. I have sent the I/O board and the spindle drive out to...

Hello,
I have an old LB-15 lathe with the OSP5000-LG control. I would like to backup the IGF files in the control to disk. Can anyone give me some tips on how to do this? Thanks.

Dave

The control is 5000L-G. It is a Fanuc spindle drive A20B-0009-0532. Yes I checked all the jumpers and they are the same. The number on the new board is 1911-164 0167A. I don't know how to check the...

My problem started with the machine not wanting to start and giving 2001 error operational panel. The problem was intermittent. So the last time I got it to come up I decided to just leave it on...

My problem started with the machine not wanting to start and giving 2001 error operational panel. The problem was intermittent. So the last time I got it to come up I decided to just leave it on...

I just bought a Lodge and Shipley RXE-2518 lathe. I just got it wired up and the spindle sounds great, but I can't get the lead screw working. None of the feed gearing is turning. I don't know if I...

I would not think there would be a parameter to tell it not to reference the tool changer. Are you saying that when you power up the machine and reference it, the tool changer does not try to index...

When you say the switches are ok when checked manually, what do you mean? Are you saying the light on the switch comes on if you manually make the switch? This may not always mean it is working. The...

When you power up and reference the machine, the tool changer should rotate around and pick up tool 1 (when things are working properly). The way it finds tool 1 is usually a proximity switch in the...

I have been trying to contact kzx for a few weeks now. I have used their software for several years to program an Amada. I am trying to get a post for a Strippit 1000R but I can't get a response from...