hi
first port of call on that one, would be a defunked emergency stop switch
it happened on both our red and blacks, I just linked them out to overide
Dave
Type: Posts; User: Dtcrafts
hi
first port of call on that one, would be a defunked emergency stop switch
it happened on both our red and blacks, I just linked them out to overide
Dave
Hi Guys
Hope you are all staying safe
now I have an issue, I bought a laser pattern which has some engraving on it
see the attached screenshot, now on the right is some black text, this is how I...
but the x carve is a router not a laser
ok
there seems to be an add on laser head
that fits but personally speaking if you want a laser then buy a laser
what do you want to cut and how thick?
Dave
HAVE YOU GOT A PIC OF SAID MACHINE??
hi I have run an engrave using your image supplied and its perfect so no problem with that
now run another engrave using a completely different image or make anew file using the existing and see...
hi
ok we can se that the 2 engraves are different sizes therefore thats why the vertical lines are not in the same place on the image
so step one create a brand new pattern of something at high...
we have 130w NON reci and the same minimum 10%
hi we just use ordinary standard anti freeze, have done for several years with no problems at all
Dave
hi we use a 50/50 mix of distilled water and anti freeze all year round with no problems
it needs to be distilled water not de-ionised or filtered and then you wont get any growth in the tube.
the...
HI
WE HAVE 2 OF THOSE
they are the same machines just different colours and powers
go for the 80w
it will need some tweaking out of the box
dave
HI
Yep had that one with a pretty new tube, so replaced the tube and everything was fine again
Dave
well after a fight an in focus scan looks the best but not great
I think tommylight is correct the joker is a milled job giving a more consistent white line ...
hi
please send me the dxf pattern [email protected]
Dave
hi
well you did ask about getting a thicker line I didn't realise you wanted a white line as well
first of all what resolution have you pulled that image in at because it looks like its quite low...
HI
Well that might work but I normally set it further from the work piece
just play around till you get a happy medium that works for you
Dave
hi
I achieve this , if you leave the cut parameters as they are and just set the head out of focus and you will get a thicker line
Dave
hi guys
this is all very interesting
we use dell pc's and often get a communication error when trying to download files to the machines, so the isolator may be the answer
however could someone...
hi
NO you wont control anything in laserdrw
Dave
hi
yes we have one and must say it actually worked quite well straight out of the box, just a bit of mirror tweaking
unlike its 130 w sister that was whole different story.
HI
they are 46" and 21"
Dave
hi
guys
thanks for the replies
the IN signal is indeed covered by the green terminal connector
I think I was trying to just confirm that all we need to do is to change the connections around to...
hi Guys
can some one please confirm, before I do anything daft
that the connections on the new supply are in a different order to the old one
ie the 5v on the old is terminal 6 and needs to be...
13 amp is good we run our 130 w with chiller on 13 amp
Dave
How do I know if I have a RuiDa machine? Thanks a bunch.
it is we can see from the control panel
hi
not entirely sure but looking at the thickness of the lines on the first picture indicates to me that you are way out of focus
HI
we have this problem with 3 mm mdf, we have found it is in the winter months when there is more moisture content in the materials stored in cold warehouses and workshops
we counter it by...
hi
yes indeed the M2 is a motion controller only
and in my own experience they are hard to come by, in fact we ended up scrapping one of these type clones because of parts issues so please check...
hi
this might be a long shot
but have you tried putting an rd file on a usb stick, plug it into the machine a nd access it and see what happens
Dave
Hopefully never but its nice to know it can be done easily should it need to be done