Tee hee, Giggle giggle, Snicker snicker...
....Be sure to keep way lube resevoir full.
Level switch prevents the spindle from turning on and moving when low!
:cheers:
Type: Posts; User: MrMudd
Tee hee, Giggle giggle, Snicker snicker...
....Be sure to keep way lube resevoir full.
Level switch prevents the spindle from turning on and moving when low!
:cheers:
Give me your email and I will send you mine
It will Be two Files Postform.m (MILL) and surfcam.pst
[email protected]
I had a machine that until today ran flawless it is a 2002 Model.
When placing the switch in Low Gear or High (forward-Reverse) and hit start, spindle will not turn on.
I opened up the panel...
115V, 60Hz 15 Amp
Our particular model is hooked up 3 phase, however i see that can be switched, and the pump controll has plugs on the various Boards with a Breaker...
I'm Curious if anyone...
Bought a ToolRoom Mill off the showroom floor. Instead of waiting for the Coolant tank system, I bought a Sub Pump from Home Depot for 60 Bucks, and some Line for it. Works great!. The question i...
Be sure your refering to the TM-1 and Not the TL1
The TL1 was not retorfittable withthe "Turret Changer once it left the factory until 2006 Do to a Engineering change in its design.
The new...
You can still manual jog the machine. we have a dec 05 Built machine.
If you go to handle jog, and push the axis button twice then hold it, it will jog. or use the wheel on the panel. Also the...
Are you refering to the HAAS Quickcode (ESPIRIT)?
HAAS has this availabl e for download on the website.
Send in the fax generated and they will fax you a registry key.
Unless you power Off then repeat the above process. this is the same as the Door Overide for a VF/HS MILL
TM use Grease Packed Spindels.
We picked one up Yesterday, been a great little machine for us. I Have used these HAAS VF- HS series Machines since 1997, Been great machines so Far.
We Dont...
For Sale $5000
It is for sale. I have no use for it, when i have VMC's
More than likely I will Sale it as we Have purchased machining Centers, and it is occupying room we need for them.
I would like to see it work before i get to that point.
I recall that some how the reference point on the Z was messed up and when homing th machine the Z would retract into the head and then there was a fault. It is possibl this is why we have not been...
It looks like the z axis is jammed and the z servo is faulting out
I found Today that G98 Does Not work with Ver 7. Ez trak BMDC
I had used Surfcam to layout a repeating Pattern and then had multiple drill points in a canned cycle.
The error i received was...
Thanks for the Response, I'll try to ge back to this soon today. Running around like a nutcase on the shop floor at the moment.
Having some problems with this cnc. We have not operated it, and I have been hoping to post to this machine via its rs232 port.
I do have some issues with the Z faulting. anyone with knowledge on...
Where could i find this software "EZ-SPS-MILL "as we had bought a used 2002 2 axis Eztrak (color display) version 7. and it did not come with the machine.
I would like to be able to have this...
I would love to get a copy of this PDF as well. We are using the version 7.0 Software (last EZtrak Version) I had to create a custom post processor for Surfcam Velocity. And would like to know some...