Dear Experts
Can someone please share link to download GT Designer 2 ?
Regards
Type: Posts; User: M.RISHIKESH
Dear Experts
Can someone please share link to download GT Designer 2 ?
Regards
Dear Experts
We have a servo driven vertical broaching machine. Ball nut of ballscrew of length about 2m found damaged. Replaced ballscrew with new one but as we had to machine new ballscrew to...
Thanks Jim for quick response
Normally we train operator, to keep both feedrate switches at 0%, check distance to go on screen, correct offset in case distance to go sounds alarming else to slowly...
Dear Experts
In a VMC, by mistake operator called wrong program and as a result, spindle tool collided badly with component and fixture
Request to revert if there is any way to prevent this so...
Dear Experts
We are facing an issue of Display not getting ON in FANUC Controller Oi-Mate-TD, Type: A02B-0321-B530 .
Found 24VDC is OK at input connector CP1 to Controller and “8” appearing on...
Thanks for your response, we found some issue in precondition ie Casting also, ok under observation
Apologies for late response
Both hi and lo Pressure connected to P line of Pressure reducing valve
After changeover from hi to lo, hi pressure increases upto 18 bars (from 15 bars) and lo...
Thank you so much for your response
As i know nothing about CAD software & Solid works etc, need to know basics - for no product as such
Thank you so much for your response
- - - Updated - - -
Thank you so much for your response
Dear Experts
I am an Electronics Engineering Graduate & Maintenance professional with 25 years of experience in CNC
Request to suggest ways or links to understand basics of CAD software, Solid...
Dear Experts
We have a turning machine with chuck having hi/lo pressure. Required pressure for Hi chucking pressure is 15 bars and for low it is 8 bars
Problem that we are facing is during...
Dear Experts
We have a SPM. Spindle motor is thro Star Delta contactor and overload relay with Main Contactor
Spindle stopped running as its bearing sieged very badly
Request to suggest...
Dear Experts
One of our HMCs having brake for vertical axis.
When axis was moved down, it was ok but when moved up then after moving a little by upto 10 mm, ( we could physically see the...
In the machine, bit 1 (GST) of parameter No.3705 is set to 0, hence we need to set the spindlespeed during spindle orientation in min-1. Please advice on how to set this
Dear Experts
Spindle orientation speed, as seen in the display, is 200 rpm
Even if we change setting value in parameter 3732, RPM is constant at 200 RPM, please advice what could be the reason...
Dear Experts
Request to brief about various codes used in CNC injection molding machines for cell phone industries like Apple etc
I am familiar with CNC HMC VMCs for Metal cutting machines
In...
Dear Experts
Further to following post, we have downloaded Spindle Motor Manual 65272EN.pdf
Gone thro details , we could only make out value for parameter 4341 ie Maximum output torque of Motor...
Thanks for your response, we found loose connection between CX4(ESP) on control card of Fanuc PSM and IO PCB, same fixed then ok
Dear Experts
Soon after control ON, we are getting error 401 VRDY Off for all axes
We have tried by replacing control card of Fanuc PSM
Checking connectors and wiring for CX3(MCC) and CX4(ESP)
...
Have checked already these are related to Emergency, back door, side door etc that means safety inputs but unable to understand how they are reaching to DCS but not to PMC1, when just for testing...
Only for testing, we have switched K0.0 in DCS to 1, with this , cross check alarm could be reset as Y4 got matched in PMC1 and DCS but 401 VRDY OFF appearing for all the machine axes X,Y,Z and B
Dear Experts
Warning 130858 Cross Check Alarm because Y0004 is 00000000 from PMC1 but DCS signals
it's Y004 00010111,
Also in CNC screen under MCC test, "execute MCC test Machine GRP1 ...
Appreciate your response, Thank you so much
Thanks for your prompt response
Dear Experts
As u r aware, in case of machining centers, it takes lot of time to open the covers to check belt and chain tension say in case of ATC Magazine & restore
Was wondering if there is...
Requirement is such that only when Z is at -100mm, B should index else no to avoid fouling of component/fixture with Machine interior
Thanks for your response,
As component and pallet size is huge, in case B is not at zero degree and in that case Z is homed, it will collide with machine interior guarding etc
do u mean to...
Dear ExpertsBy altering both customized and Fanuc parameters, position switch option could be made active ie now B would not index if Z is at 0, B wud rotate only when Z is at -100mmNow we need an...
Dear Experts
As you are all aware, drum filter is used in most of the machines and in case it got clogged & not cleaned as per the predefined schedule, we get huge coolant leakage
Kindly revert...
Dear Experts
We found the problem due to Hydraulic power pack - further we plan to replace Pump in the power pack
Regards