Search:

Hi. I am running a waterjet with ncsudio software as well
Im having a problem with squareness.example. X will travel 1000mm
Then i move Y down 500mm and m X will adjust by 2mm and when i move it...

Hi all.
I am running a Mach3 Flow waterjet with a Hyplex Prime 3000 hp pump.
It started dropping pressure from 360 mpa all the way down to its low pressure setting of 103mpa. I have done a complete...

Thanks guys for the replies I really got some useful info that will help in the future.
Regarding my problem... I finally got it sorted.

I had to put in my major dia where the thread starts into...

Thanks I got that. What’s confusing me is the "I" they say it’s the taper amount in radius. So, if my taper is 3deg does that mean I have to actually put in I-1.5? which I have tried and it cut but...

sorry here it is.

Thanks guys

I tried dropping the start value to 125 it still came with the same alarm.
I then dropped it to 120 so it cut(on the graphic) but it cuts way under as if 120 was its end point. the...

Hi all.
I`m trying to cut a internal taper thread on a Okuma LC20 osp5000L
here is what my programme looks like.

N540G0X127.631Z9.371
N550G71X133.635Z-88.759H2.0 I-5.794B76.D0.2F6.43M22M32M73...

Hi. I need to do radial ingraving using Edgecam but have no idea how to go about it.
A friend sort of got it right but had to make each letter a surface wich took a long time.
Is there an easier...