What is the point of an M76 on a Head2 program for the Star Machines?
Why not leave it in M75 and leave out the slashes in front of the pickoff part of the program?
Confused!
Type: Posts; User: scolee
What is the point of an M76 on a Head2 program for the Star Machines?
Why not leave it in M75 and leave out the slashes in front of the pickoff part of the program?
Confused!
Was wondering if anyone had a sample program for the new Star SR32j-type 2, in Non-Guide-Bushing mode, using the stopper(T1000) and would be willing to share it.
The manual explains NGB mode pretty...
Thank you so much deadlykitten, your suggestions worked great-machine is up and running.
Had to change VSZOZ to VZSHZ (a workshift, usually at zero).Everything else worked like a charm.:)
Fanuc...
Thank you very much, deadlykitten . Will try this morning and post results:)
We just bought a brand new Okuma Genos, 2-axis lathe. Control has Usertask2. I am trying to do a few things.
First, I cant figure out how to emulate a While/Do loop.
Ex
WHILE[#107LT#105] DO1...
Posted this on another website-lotta views, no replies-cant believe I'm the only one that's had this problem.
Star SRIII Swiss Machine HEAD2
This weekend I ran a program like this:
1.Bore...
Thanks Guru-see you there
The code posts correctly when using MPSUBREP post, so it must be in the post processor file
Thanks for the reply MCGuru,
But the problem is with helical motions(XY and Z).As soon as a Z motion is introduced, the code starts posting with I's and J's.Try testing the post on a...
Sorry about that-I attached the wrong file- arcoutput was the 1st thing I checked
I've been playing with this post for days and I cannot for the life of me, figure out where the problem is.I'm trying to get any helical motions(helix bore or threadmill toolpaths) to post arcs with...
We've got an omniturn gangtool lathe.The machine runs great and is very accurate.The one thing I cant stand is the control-it's dos-based and has no macros and very limited cycles.I've been looking...
Thanks for the replies>I'll give it a shot
Looking at the file I attached, my line represents the centerline of my lathe spindle.What I'm trying to do is basically mill off half the part at the centerline so it looks like a "c" from the...
I've got some mc9 mill programs for pockets that I mill into aparts on my Fanuc Robodrill.The parts start out on a swiss machine.We recently purchased the G112 option(polar interp) for the swiss...
Thanks for the reply Alex-that's what it was-Thought I had checked that-Sorry to waste your time-Thanks Again
Scott
After verifying, I believe I used to be able to rotate,pan,zoom,etc.- to see if I had any gouges or whatever-now when I try to do that-I get a message along the lines of "view cannot be changed at...