Search:

Usually laser cutting vendors charge according to factors: cut distance, material thickness & number of pierces. a Vendor I know, does something like: [ Cutting Rate (per meter) x cut length (meters)...

That's a great tip. I just looked up in my router settings and there is indeed option to bind IP address to mac address. I will check the MAC of machine tomorrow when we start machine and update it...

So another update here.

SUCCESS!!

On my machine:
I changed the I/O channel to 9 & then set up the CNC IP address to 192.168.1.201 & entered Router IP address to 192.168.1.1 in the ETHPRM>EMBED...

Hi,

I know this is old and I am bringing this up. However there are few updates on this.

Since the problem discussed here, we ended up buying a DNC Device (Micro DNC 2) & have been using Pen...

Hi,
Unfortunately I do not have what you are seeking however I had another question for you.

What OS are you using Fabriwin on? We are stuck with 32 bit system as the license thing we have only...

Hello,

We are looking into information about 1-2 KW Laser cutting machines. We have received info from various companies but shortlisted 2.

Major difference between those 2 is the laser source....

Hello,

We have a Amada Vipros 2510C TPP.

It was working fine till 5 PM one day. Next day the Hydraulic System wouldn't turn ON automatically throwing error of "Hyd motor thermal trip" &...

How to use the key? Isn't the key hardware binded?

Will it work on Windows 10 64 bit machine? Do you provide emulator for 64 bit machine?

I think it is related with the auto index stations which we have 2 stations in our turret.

There are 2 clamps. 1 each at each station. But they seem to be clamped already. Still don't know machine...

Can you please check following thread:

https://www.cnczone.com/forums/fanuc/428210-fanuc-alarms-1060-1063-amada-vipros-tpp.html

Where are these clamps and what can I do to get over this error.

Hello All,

Today earlier we were greeted with following alarms on our Amada Vipros 2510C with Fanuc 18i PB

1060 AI CLAMP (ON) UPPER (A) LS
1061 AI CLAMP (ON) UPPER (B) LS
1062 AI CLAMP (ON)...

Thank you for the link!

Hello,

We are trying out Radan 2020 for nesting and G Code for our CNC punching machine (Amada Vipros 2510C)

I have been testing various things however in order to truely use it on our...

Thank you for the link. I had seen this before somewhere but lost it.
I will look into it.

I know we can use Win 10 32 bit for this however as 32 bit machines have inferior performance issues, we...

Hello all,

We have a Amada Vipros Turret punch press for sheet metal punching. We have been using Fabriwin for G code generation after building sheet layout in AutoCAD since years however that...

I had done that. I even turned win firewall off but still could not connect.

I do see it in my disk management as below:
https://prnt.sc/15n24rl

It says RAW. I tried formatting from here but still can not.

Oh you are right. My ISP / Router probably wont assign static IP addresses. I know how to open the router management page. but after that I will have to check.

Will test it and return back.

Hello,

I have Amada Vipros 2510C TPT with Fanuc 18i-PB.

It does have Mcard slot near display. I have purchased Transcend CF card 1 GB along with PCMCIA adaptor and card reader (for PC).

I...

I tested on Win 7 64 bit laptop. I am planning to try out the router connection within next few days so that any computer on network might be able to host files.

I could not get the FANUC program to work no matter how much I tried.

However I did get the FTP server to work with the crossover cable. All thanks to Doosan Infracore. Although this manual is...

Hello,

I just tried using crossover cable and I was able to ping my CNC from my computer. I also did the communication test from the "program transfer tool" and it also pinged my CNC. (Image...

Thank I already went through that before. Today I will try with either crossover / router way to connect.

We only can see the Embdd Eth option available on my controller. Hopefully today I will be...

I can also utilize router if necessary. I will check with that. So I will input the router ip address in CNC accordingly.

hello.
Thanks for the suggestions.

I actually got the file transfer program and connected my laptop to the controller via ethernet cable directly.

I did input ip setting on controller and...

Thank you for your suggestions. We do have Embed option available on our machine so thats not an issue.

I did check with fanuc website but sadly there is no mention of the tool on our country's...

We have Amada Vipros 2510C with FANUC 18i-PB Controller.
We have been using RS232 since years however it has given us its fair share of problems. Majorly we had a burnout issue on main board due to...