Search:

Mail support and they will provide you with a link to another installer that you can select "repair" from the install and your software will work.

The problem is solved, I got ahold of the proper parameters it looks like the lubrication didn't get enough pressure because of some timer. works in full auto and everything as it's supposed only...

Update, I got the machine running by setting the rapid for the X axis lower to about 2m/min instead of the default 4.

Now I have another problem, I am trying to run a program I wrote, however the...

I found the problem with the jogging not working, it was a interlock switch in the electrical cabinet, using my restored parameters my z axis works however my x fails out with a LSI OVERFLOW error...

I have the original paper with the 9000 parameters and i recovered the original parameters from a paper tape.

The issue is still there, I've read through the ladder, and there dosent seem to be any keep relays or anything governing the limit switch direction, just a bunch of timers and a few counters related...

I recently bought a lathe(mondialle gallic 420(also known as mondiale n.v 81), with lost parameter which I managed to recover from som paper punch tapes,
However now I have another problem the limit...

Usually engraving is done with engraving cutters and not drills as they do not cut very well and arent very rigid if you still want to try it you can try it with as short drill as possible. I think...

Great job!, im looking forward to seeing you make chips with it :)

Adobe Machine, While that's really interesting, what has that to do with the actual topic of this thread?, a cam measurement machine?.

Hm, nice shot NC_CAMS, you really killed that conversation.
Why is it that wherever I see you mention stuff you talk about how good you are at whatever stuff you do.
Obviously someone with no...

This project looks really nice!, I hope you will update with your latest progress soon :)

There are a file with postprocessor definitions on the Mastercam X cd, that should help you modify or write your own post, I would just start with a fanuc post(MPFAN) and modify it..

Hello, The MPFAN post works excelent with some minor modifications togther with emc

Have you had a look at double roller throttle bodies?
They look neat and flow very well, though you still end up with the same problem with nonlinear flow, and they are pretty complicated to...

If you look at the axis widget in the corner you'll see what axis are Z,
if you want to rotate there's move/rotate in the features menu.. :)
/Anders

Hello, currently converting a Schaublin sv13..

The spindle and the machine rigidity will be the limiting factor if you are going to be cutting steel(I WISH I could give you a number but I just cant seem to remember)
As for speed there isnt any...

Hello,
What kind of speeds and what kind of material are you aiming to cut is what will dictate servos/steppers and if the spindle is powerful enough.
As far as I know there are no cheap servos...

I'll try it after 16:00 today, Thanks for the help :)

the tool offset should be correct, it's just a matter of setting up the correct tool size in the create/select tool dialog isnt it?

Hello, everyone, I am trying to machine a pocket which is a round hole in the middle in my part, the trouble is that the size comes out 2mm smaller then drawn, unless I draw the hole oversized in my...

Hello everyone I have a converted manual mill,
and I am considering building a toolchanger for it.
The trouble I have is that the tool holders are sticking inside of the taper.
Usually I am...

Hm, I am interested in a EDM power supply... perferably a digital one....

that seems like a very nice unit, and the price was awesome
it'll be fun to hear how it is to weld with..
Try welding some normal iron first, and getting the feel for adding filler rod, and when...

Very nice, I havent tried any Miller unit, What kind of amerpage does it have at max?

I would say 250 - 300 amps since welding alu really takes lots of current

it's a benchtop machine, with a 1 or 2 hp spindle.. cant remember it now since I am away from the machine

hm, I've got a tabletop machine, I 1 or 2 hp spindle...

how hard is it to machine them in non heat treated state?, the only problem I have is that my machine is tiny :)
Thanks for your reply