I did this test over the 1300mm
This is the 1300mm calibration in X
454032
26 50mm rectangle
A---Z
454030
The Results
Type: Posts; User: MauricioBachega
I did this test over the 1300mm
This is the 1300mm calibration in X
454032
26 50mm rectangle
A---Z
454030
The Results
The machine is well calibrated, I made a 1000x1000 square and set the pulse per unit of X and Y.
The problem is that it changes the measurement along the X axis
I have a problem with my machine, it is cutting with different sizes along the X axis, I have already checked the mirror alignment and it is 100%.
I was working with a cut of 2 pieces from the side...
I tried this, but dont have the Work page, i heard its an optional...
Thanks anyways
Hello, I have a cnc ROMI, with the controller Fanuc 21i-TA, and the manual says it has a 'Work' page, where is the G54, G55, etc, but when I press Offset, appears only 'Work Shift' softkey, and where...