Hello,
i use my hobby lathe with mach3 and 2 electronic handwheels. Threading works not correct. Is there someone with a cnc controlled lathe with correct
working threading and will be so friendly...
Type: Posts; User: Holzwurm56
Hello,
i use my hobby lathe with mach3 and 2 electronic handwheels. Threading works not correct. Is there someone with a cnc controlled lathe with correct
working threading and will be so friendly...
Hello,
threading works on my lathe with Mach3 not correct. In the first 4 passes the tool finds the threat and not more. My Os is
WinXp. Is here someone with a lathe, 2 lpts and mach3 with correct...
Hello Craig,
its the first time I will build so a great machine. I am not sure that the machine will working fine. So I want to test the machine
first ant want to use this controller from my stock....
Hello Craig,
many thanks for your answer. You say the 57U is not useable for a plasmacutter. Its possible to use a 57U for a
three axis milling machine? I have Mach3 with licence and two 57Us from...
Hello,
I am building a three axis milling machine and a plasmacutter. I am looking for an external controller for Mach3. Does someone
use successfull an Pokeys 57U or E and Mach3 to control a...
Hello Marv,
my robot arm is "naked", without servo drives and controller. I will look for servo drives with step and direction input and a controller like Mach, Linux or similar..
I look for a...
Hello,
I get an old industrial robot arm. Does someone knows a possibility (Cam-Software or similar) and a
controller (Mach, Linux) to work with robot arm. 3d-printing or milling?
Thanks
Hans
Hallo Andreas,
wo und wann hast Du die YAPSC-Platinen bestellt? Yapsc wurde wohl mal beendet, der Shop war tot und ich habe keine Infos mehr gefunden.
Für mich wäre damals aber die Version mit dem...
Hello,
does someone knows a software to read the parameters from a simodrive 611 AM-Modul with a serial port?
Many Thanks
Hans
Hello,
i have use the powersupply from the pc, that was not strong enough. I change the jumper and use an external powersupply and now the encoder are working.
Hans
Hi hoecken,
i see machinekit, maybe i am to silly but i do not understand what machinekit is. For me its nearly the same as linuxcnc.
Thanks
Hans
Hello,
my 7i77 has an output on the encoderconnector pin 3 and 6 is only 4Volt, the green led is blinking. Does someone knows what can I do?
Thanks
Hans
Hello Tommylight,
can you tell me what is machinekit?
Thanks
Hans
Hello,
does someone knows a way to control a cnc-machine with a laptop using usb or network? In the Github i found a project RT-8p8c. Does someone knows this project or works with it? The last...
Hello,
I get 2 five phase stepper motors without drives, so they scrap for me. Does someone knows about diy 5 phase stepper drives shematic or code or similar? I found nothing in the www.
Many...
Hello,
the Z-Axis servomotor from my milling machine has a brake. Does someone knows an output signal/pin from the 611 servodrive that is only high when the positioncontrol is active to open the...
Hi Nikolas,
many thanks for your answer. This is the documentation, but I am looking for the user manual.
Thanks
Hans
Hello,
does someone knows a user pdf user manual for LinuxCNC in english language?
Thanks
Hans
Hello,
I have found 2 five phase stepper motors. Does some knows where I can find a shematic for a five phase stepper motor?
Or a microcontroller based driver?
The motor works with 70V and 2,8A....
Hi Andrew,
many thanks. This thread was very helpfull. My spindle speed dro is now working.
Hans
Hello,
I have retrofit my old lathe. The cnc-control is about Mach3 with 2 printerports the os is win7 home pro. In the diagnoctics mode I can see the spindel speed sensors working. In the manual or...
Hello,
I want to drive my lathe with Mach3 and external controllers, but with no sucsess. I buy a computer and a card with two printerports and install Mach3. When I run the Drivertest.exe the...
Hi,
I use UHUservo for the two axes, manually toolchange, two endswitches for every axe, two handwheels with A + B channel and a magnetic switch for spindle speed. For machining control I use a...
Hi Mike Kilroy,
many thanks for your answer. Some new servo drives do not use the tach for feedback. They use only the incremental signal. Do you know its possible to use these motors only with the...
Hello,
I have an old woodworking machine with servodrives Simodrive 611 and motors 1FT5062, 1FT5064 and 1FT5066. Does someone knows a a servodrive with digital step and direction input to replace...
Hello,
has someone tested to use a roboter arm as carrier for a high speed spindle and mill soft materials like wood? Or to use a roboter arm as 3D printer? Does some knows a software to control a...
Hello,
does someone knows a controller board for LinuxCNC to control a lathe with step and direction servos what is connected to the PC with a usb or network cable?
Thanks
Hnas
Hello,
yesterday I get the isolated current sensors. I will see what happend when the IC gets 30Ampere.
298534
Hans
Hi Mihai,
later I read that you use Eclipse and gcc. Dont be afraid about my question. Now I install Eclipse, but its very difficult.
Thanks
Hans
Hi Mihai,
I get the mini development boards from China. What for a kind of Development System and C-Compiler do you use? Is there a hex-file of your firmware available? Is a executable file of the...