Search:

I am using SolidWoks 2015 and SolidCam 2015. I am trying to machine a curved slope, using Translated Surface and it does not work well, because you have to adjust the parameters of the swept function...

Hello! idefixRC
Yes, I already used it. Mach3_4Y sends me error messages. The only post-processor that works well is the fanuc_2013_4X. I think that this one does not recognize the function...

Hello! en need help
My project is 3 grooves at 120 degrees around a cylinder, my 4th axis revolves around Y axis. I use Mach3 on my Router, SolidCam and Fanuc_2013_4X as a postprocessor to generate...

I use SolidCam and SolidWork, Fanuc postprocessor and Mach3 on my CNC router. My problem is G0 for the 4th axe A is very very slow. How can I do to do a G0 with a normal speed for axe A?
Thank
Best...

Hello dcoupar

I have fixe my problem like this
10 G0 X1,6 Z,06
20 G71 U.06 R.02
30 G71 P40 Q70 U.04 F.01
35 G42
40 G0 X1.36
50 G1 Z0 F,008
60 G3 X1,5 Z-.07 R.07

Hello dcoupar

I have try your modifications and the result still a sharp edge.

10 G0 X1,6 Z,06
20 G71 U.06 R.02
30 G71 P40 Q70 U.04 F.01
40 G0 G42 X1.42
50 G1 Z0 F,008
60 G3 X1,5 Z-.04 R.04

Bonjour a tous

Mon tour est un Romi M17 avec contrôle Fanuc 21i-T.
En mode auto, avec un outil de 0,030'' de rayon. Si je programme un coin rondcomme celui-ci
G1 X0,940 Z0,0 F0,01
G2 X1,0...

I have a Fanuc 21i-T. I would like to use a memory card like Scandisk 64 Mo with a adaptor PCMCIA. But my Fanuc is not able to read my memory card. Went I want to read or safe, my controler send to...

Hello! Bill

When I had included in my program this line "N60 G0 X,170 Z0,04 (This will invoke G71 Type II), this error occure: 065 illegal command in G71-G73. Perhaps a bad setting of my...

Hello!

Thank Bill
Your answer was correct.
I had two major errors, my tools radius was to hight and my T value was wrong too.

I have an other question:
How can I...

Hello!
Dcoupar

This is my program
%
O0102 (INSERT 48 66363 )
N10 G20 G50 S3000
N20 T0101 (CONTOUR )
N30 G97 G0 X,375 Z,04
N35 S1800 M03

Hello!
I have a Fanuc 21i-T. When I use the G42 code in my G71 ..G70 caned loop this error message occur '' 041 Interference in NRC ''
What's the problem?

Best regards
Jean-Denis

Salut André

Moi je viens de la ville de Québec. J'utilise une petite CNC ROMI M17, Elle va très bien sauf sa connexion PCMCIA. Elle a fonctionné 2 fois.
Tu trouvera ici tout...

dcoupar

You are the best

Best regards

A++ J-D

I have un other question for you.

How did you find the value of P652 and the Q098 and the last one R = x axis incremental taper.

Best regards.

A++ J-D.

Hello dcoupar

My problem is my thread are too loos. Went I have cut my threads, I have stopped my CNC after ten pass and the result have been very loose.

I sure that my R and my X values are...

I need to do a pipe thread 1" NPT 11 1/2.
My G-Code are:
T0202
G0 X1.281 Z.06
S400 M3
G76 P010000 Q00 R00
G76X1.1304 Z-.99 P753 Q150 R-.031 F.08695
G0 X5 Z 7 M30

What's wrong?

Bonjour a tous.

J'ai un tour ROMI M17 avec un contrôle Fanuc 21i-T. J'ai commencé a utiliser une CompactFlash Card de ScandDisk de 256 Mo formater en FAT. Elle a fonctionné une douzaine de fois et...

Hello!

I would like to download my program file into my Fanuc 21i-T by the RS-232 port.
Is-it possible? if yes how can i do that?
The RS-232 pin out is it standard?


:rolleyes:

Bonjour à tous
Mon controle est un Fanuc 21i.
Lorsque l'on programme la sélection des outils on écrit T?? ?? 2 séries de chiffres. La 1ère paire représente l'outil, mais que représente la 2e paire?...

Hello!

My lathe is a Romi M17 with a Fanuc 21i
When this error occure, 7156 SPN:1 inner cooling fan stop, a alarm goes on and my lathe stop.
I have three fans, one in the front door...

Salut Claude

Y-a-il possibilité de savoir lequel est en faute juste par le message? SPN1 identifie-t-il un fan en particulier?

Merci Jean-Denis

Bonjour.

J'ai une CNC Romi M17 avec contrôle Fanuc 21i.
Cette erreur qui apparait subitement: error 7156 SPN1: Inher Cooling Fan Stop. Ou est ce fan? Est-il a l'intérieur des drives, sur les...

Bonjour a tous

J'ai un tour CNC Romi M17. J'habite la ville de Québec.

A++

Thank you everybody

Your help has been very appreciated.

Yesterday I fixed the geometry, I took a light cut and I wrote the mesure in offset geo X2,000 tool 10. After I ran in CNC mode, I...

Hello!

My control is a Fanuc 21i. I have made the geometry offset correctly for the tool 10 but whent I run the program, the diameters are 0,004" below. I want to correct this error but I don't...

Hello!

How can I use the offset wear to correct the axes X and Z when my diameter is greater or smaller that the value of my program?

Best regards

Jean-Denis

:confused:

:cheers:

All is OK.

Best regards Jean-Denis

Hello!

I used G83 for drilling a deep hole, I would like that my drill retract, but it not possible my parameter 5101 is set to "0". How can I change it? My control is a Fanuc 21i-T my lathe is a...

How can do that? I have a Romi 17 with Dorian tool post. I have one chuck holder and I need to drill and reame a hole. What is the best way for to do the tool offset?:rolleyes:

Thank you

J-D