Hi Ingo
why don't you go on there website and suggest as I did;)
regards
peter
Type: Posts; User: Peter Gillespie
Hi Ingo
why don't you go on there website and suggest as I did;)
regards
peter
Hi Ingo
Why not go on website and suggest as I have;)
Hi Margocnc
yes you are correct
there is no way to adjust the rapid feed rate
it is linked to feed rate
Bobcad are aware of this
suggested they put a rapid feed rate check box in the high...
cheers Rob:cheers:
Hi Nick
you can use curves if you know the points
In Delcam they use what is called a pcurve which you can manipulate
Same for Bobcad you can use different points to manipulate the line or curve...
Hi Nick
as you can see what I was doing is creating intersection points to create an anchor point to generate the surface
the shape will change but only to the anchor point you create you want to...
Hi All
Here is a video of extracting information from a model in BobCAD V27
https://www.youtube.com/watch?feature=player_detailpage&v=3WFJvD1qWcI
Hope this helps anybody trying to get...
Hi All
Here is a video about layers and colours in Bobcad
https://www.youtube.com/watch?feature=player_detailpage&v=e5A-CgyTVLQ
Hopefully this gives a understanding about layers and how I use...
Hi All
Here is a video of a tech question asked here in the Uk About making an irregular shape in Bobcad V27
https://www.youtube.com/watch?feature=player_detailpage&v=sT6Wxdz0DGo
Hope this...
Many Thank's:cheers:
Sorry Buddie
I can not help wrong version of Solidworks I have:(
Hi All
Here is a video of Spiral Milling BobCAD V27
Sorry Jrmach still in mm (chair)
https://www.youtube.com/watch?v=QIMnofJOQPM&feature=player_detailpage
hope this helps anybody
Hi jrmach
What version of solidworks?
I have solidworks 2013 with V4
but it comes up with error when loading
Hi
You may have selected the machine but have you defined the machine?
Hi BurrMan
Many Thanks for your input some times its hard to explain to people about the 3 oclock rule:cheers:
Hi Nick
I picked the diameter's in V27
Hi
Here is a video of how to make your jaws using the solid model as requested you could have done this quicker if you extrude cut from your 2d drawing
but hopefully it will give you some idea...
Hi All
Here is a video on drawing and understanding Circle's in BobCAD V27
https://www.youtube.com/watch?v=wOIehGttcqs&feature=player_detailpage
Hope this helps anybody
Hi All
Here is a video of basic drawing of lines and trimming in BobCAD V27
https://www.youtube.com/watch?v=I3Q9NvZVL4E&feature=player_detailpage
Hope this helps anybody on basic drawing
Hi All
Here is a video of Thread Milling in BobCAD V27
https://www.youtube.com/watch?v=TaOkHF2249Q&feature=player_detailpage
Hope this helps Anybody trying to do this op
Hi All
Here is a video of adaptive roughing and z level finish BobCAD V27
https://www.youtube.com/watch?v=dR9aJ2SjPHU&feature=player_detailpage
Hope this helps anybody trying this op
Hi All
Here is a link on how to do a planer toolpath in BobCAD V27
https://www.youtube.com/watch?v=BAlxUqlM6X0&feature=player_detailpage
Hope this helps Anybody trying to do this op
Hi All
Here is a video I made of how I made a 3D Drawing using BobCAD V 27 From a 3D Model
https://www.youtube.com/watch?v=-gFPmWZIg1c&feature=player_detailpage
Hopefully it helps
or does...
Hi Scott
Here is the post for your c-tek controller
just unzip and put in your settings folder where OneCNC is installed on your pc
281616
yes I'am started in Feb